Jump to content
SAU Community

Recommended Posts

Hard luck dude the odds caught up.

May i ask whats wrong with your exhaust and wheels setup?? Or why they defected?

They're 18" and stock are 16" so i'm right, but i need engineer certificates saying that they comply with the australia design rule.

same with exhuast... any modified exhaust on a car has this rule

Yeah really, it'll cost you more grief than its worth. Lesson learned

definitely

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Dude ouch!!

As said, yes it could of been a lot worse.

Sucks though majorly that you got done though; for both speeding and defects.

What a shit way to start Christmas

I had the same treatment not long ago... sent to epa for noise... had to whack a stocker pee shooter on there to pass... and the dicks defected me for an unenclosed pod filter.... and ride height..

but i out smarted them with the ride height ... i just put tighter rubber things on to support my exhaust and it raised it like 30 mm .. lool

They're 18" and stock are 16" so i'm right, but i need engineer certificates saying that they comply with the australia design rule.

same with exhuast... any modified exhaust on a car has this rule

definitely

Hey,

no, don't think so. Pretty sure exhausts are an 'owner-approvable' modification according to the RTA.

This means that as long as it passes the relevant ADRs (ADR28, for noise level; ADR37, for actual

gas and particulates; there may be others - ask the RTA) it's OK. It doesn't need to be standard.

What most likely happened is that they tested your car with a dB meter; and it was too loud (corrected

reading of over 90dB, putting the car in violation of ADR28). I doubt they tested ADR37 - pretty sure

the kit to do that test only exists at Penrith and Botany.

To fix this, visit an exhaust shop with a meter and tell them you need it quieter than 90dB at test RPM -

for you, it's probably around 3500RPM. Note I said 'corrected' - they're supposed to apply corrections

for temperature and pressure (this doesn't often happen). If you get tested in the middle of a cold night

your car will read louder than in the middle of a hot day.

Borrow a set of stock rims.

Then visit the inspection station, show them your car complies with the paperwork, and get the

defects cleared. Visit them in the middle of a hot day in case they don't apply the corrections on the

noise test.

Then your car is street-legal again, and you can figure out whether you want to get your car

engineered (budget about $500) for the rims or not. If the rims stick out beyond the bodywork I'd

guess you have SFA chance of getting them approved - talk to your engineer about that (you might

be able to flare the guards enough to get them allowed). Might be better to replace them with a set of

smaller rims which don't require approval from a signatory.

Lastly, don't drive like a tool. Driving like a tool attracts the wrong sort of attention. And if you _do_

drive like a tool, don't be surprised when the police throw the book at you.

Regards,

Saliya

Hey,

no, don't think so. Pretty sure exhausts are an 'owner-approvable' modification according to the RTA.

This means that as long as it passes the relevant ADRs (ADR28, for noise level; ADR37, for actual

gas and particulates; there may be others - ask the RTA) it's OK. It doesn't need to be standard.

What most likely happened is that they tested your car with a dB meter; and it was too loud (corrected

reading of over 90dB, putting the car in violation of ADR28). I doubt they tested ADR37 - pretty sure

the kit to do that test only exists at Penrith and Botany.

To fix this, visit an exhaust shop with a meter and tell them you need it quieter than 90dB at test RPM -

for you, it's probably around 3500RPM. Note I said 'corrected' - they're supposed to apply corrections

for temperature and pressure (this doesn't often happen). If you get tested in the middle of a cold night

your car will read louder than in the middle of a hot day.

Borrow a set of stock rims.

Then visit the inspection station, show them your car complies with the paperwork, and get the

defects cleared. Visit them in the middle of a hot day in case they don't apply the corrections on the

noise test.

Then your car is street-legal again, and you can figure out whether you want to get your car

engineered (budget about $500) for the rims or not. If the rims stick out beyond the bodywork I'd

guess you have SFA chance of getting them approved - talk to your engineer about that (you might

be able to flare the guards enough to get them allowed). Might be better to replace them with a set of

smaller rims which don't require approval from a signatory.

Lastly, don't drive like a tool. Driving like a tool attracts the wrong sort of attention. And if you _do_

drive like a tool, don't be surprised when the police throw the book at you.

Regards,

Saliya

Wow, thanks for that.. I can tell you now that my exhaust has been already defected and taken to an exhaust shop which complies and is under the 90db rating. RTA did NOT use any sort of meter for the exhaust as the car was off, For the rims, i'm putting stock back on and getting cleared..

Thanks for all your help.!

bad luck matey, the defect doesnt look too bad though couldve been heaps worse. shouldnt be too difficult to get it cleared

if the cop really wanted to be a c**t he wouldnt of let you chuck a shit lol.

good luck with the defect clearing.. looking at the bright side, at least with the 3 months you have off you'll save alot of money not driving and modding :)

Just a quick note, you won't lose your license for ages yet. I know someone who was booked for the same offence in January of this year. He paid the fine on time and received the letter from the RTA a good few weeks later advising that his loss of licence was to occur in the first week of May through to July.

that defect notice they gave you specifies that to be cleared you need to get a minor part inspection at an AUVIS.

This means that you only need to get it inspected at any place that can provide a blue slip.

Put the parts that were mentioned on the notice back to standard, then get it inspected. You may not even have to change the exhaust, talk to the place you are going to get it passed by and see what they say needs to be changed before doing anything.

Either way, you don't need to take it for a full RTA inspection and emissions test, so dont stress about it, it is not big deal.

You will probably still have your license for a while yet, so get it done now while you can drive.

Sorry to see you got caught out!

Edited by siksII
wow intresting...

D_I_F i had mcdonalds.. i have no idea how i got sick..

Sorry dude but I suffer from the same problems.. if I eat something wrong it def wont agree with me.. so I stop eating those kinda foods.. Sloves the problem all together..

Not to mention you just got your licence and should know better..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...