Jump to content
SAU Community

Recommended Posts

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

I don't love my stock cooler, Paul has un-natural ideas about having relations with automobiles and their parts that we don't all share.

The idea is match your flows and you get go. Mismatch the flow and you go slow. (thankyou Doctor Zeus) so don't go slow with flow cost dough crap, when you can be a flow-match-go chap.

The GTR cooler is about the right upgrade for a stock turbo if you like to hit your head with rocks and eat poisonous mushrooms, cause only then will you seem to get a quicker time.

Full boost on a stock turbo produces about 300HP worth of flow at turbo(that is a stock RB25 turbo not the dinky RB20 one). GTR cooler 450 -500HP worth of flow. Bad match. your at least 150HP out of whack air flow wise. Add the extra volume of the new piping and it's not real flash.

Mate save your money for a mod that will actually make your car go quicker. Front mounted intercooler is barking up the wrong tree at this stage.

For the record I am not against larger intercoolers I am just 'for' getting the right sized one and not pissing money up against the wall with silly mods.

No I don't have a spare granite rock to hit my head with, at least not one the right shape to make me believe you.

I believe there are already plenty of front mount advocates past and present running much slower times than me to make the point your looking for. In fact you have one of those cars :)

well the cam will be good if you match it up to an ecu remap.

It's very easy to put the cam gear on, do that yourself. Then take it in to get a remap with the cam timing setup while your at it.

Is the exhaust all the way from the turbo back?

The flywheel/clutch mod is a good one too.

Hehehehe

"And the prize for the most entertaining post in a

intercooler catagory goes to.... *rustle of envelope*...

Originally posted by rev210

I don't love my stock cooler, Paul has un-natural ideas about having relations with automobiles and their parts that we don't all share.

The idea is match your flows and you get go. Mismatch the flow and you go slow. (thankyou Doctor Zeus) so don't go slow with flow cost dough crap, when you can be a flow-match-go chap.

The GTR cooler is about the right upgrade for a stock turbo if you like to hit your head with rocks and eat poisonous mushrooms, cause only then will you seem to get a quicker time.

Good ole Dr Zeuss :)

rev210!

So if I have heard right your suggestions are to run your RB better before running it harder, alot of owners seem to talk about "boosting", but for a stock r33 is this the first thing we should be looking at? I like you idea's ie, flow matching, cam gears, ecu remaps etc.... Minor intelligent mods and not the big dumb expensive mods most go on about! Even if you have the money for the big mods you still need to think about your plan of attack as we all wont the most bang for our buck at the end of the day. Like you have pointed out there are a few other things you could spend your I/C money on first.

:)

raasclaat : Get the hybred front mount if places are not stuffing you around you should be able to get it piped and installed for 1400, you have to bargain with them, im talking 800 for the cooler dont pay more, and 600 for the install, you dont have to go to a tuning house back yarders do just as good job, usually heaps cheaper. Then add some timing and up the boost and you will be beating rev210 and this conversation will be over. some type of boost cut etc defender will be needed, there are some people that will do this to the ecu for pretty cheap.

Or you could put in cam gears, untuned. yeah that would be good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back on topic for you for a post Will it be on pump or ethanol? 2025 Spec RB build: G30 660 .83 would be good  artec manifold turbosmart 45mm external gate 1000cc Injectors Kelford cams 264 and springs Pistons and rods for insurance Oil pump with billet gears Headdrain and all good oil mods Quality intercooler 3.5 inch dump pipe to decent exhaust Link plugin Ecu or what ever your tuning is comforatble with Bolt on Trigger Kit - Nzwiring kit is go to ARP Headstuds Quality headgasket quality fuel pump- a TI/walbro 525lph PWM would be the go Quality fuel reg Will be over $15K AUD Enjoy the noise of rb on gate at over 7400rpm. Start looking for gearbox conversions if your hard on the gear. Now I've been there and done that with rb powered street car (2007-2022) much prefer newer stuff. Anything 90's Japanese is not a great experience these days and highly over rated. My 2015 Brz with a heap of suspension mods is such a better car even with out the power of my old s chassis' even on track. If wanting to play light chassis and decent power for a  giggle a k swap 86/brz would be the go Check my old build for engine stuff I really need to pay attention to post 2016 BMW stuff but seem all very heavy 1600+kg  
    • I mean, the 240i is not a Supra... make it drop a few hundred kg, have a sportscar chassis, clearance for wheels etc... Maybe I want a hardtop Z40i XDrive or something :p I do agree with you though and have long said the B58 Supra/240i/340i/440i is the new R Chassis/JDM90's turbo rocket for mod lovers to ... not always appreciative response lol. Doesn't make it not true though.
    • I will do the build myself but I will be paying for the tune because I don't know how much about that and would rather it be done right and by a professional 
    • Will you build and tune it yourself or do you need to pay for labour? 
    • Mechanically that's essentially what the M240i is, it's just not pretending it's not a BMW
×
×
  • Create New...