Jump to content
SAU Community

Recommended Posts

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

I don't love my stock cooler, Paul has un-natural ideas about having relations with automobiles and their parts that we don't all share.

The idea is match your flows and you get go. Mismatch the flow and you go slow. (thankyou Doctor Zeus) so don't go slow with flow cost dough crap, when you can be a flow-match-go chap.

The GTR cooler is about the right upgrade for a stock turbo if you like to hit your head with rocks and eat poisonous mushrooms, cause only then will you seem to get a quicker time.

Full boost on a stock turbo produces about 300HP worth of flow at turbo(that is a stock RB25 turbo not the dinky RB20 one). GTR cooler 450 -500HP worth of flow. Bad match. your at least 150HP out of whack air flow wise. Add the extra volume of the new piping and it's not real flash.

Mate save your money for a mod that will actually make your car go quicker. Front mounted intercooler is barking up the wrong tree at this stage.

For the record I am not against larger intercoolers I am just 'for' getting the right sized one and not pissing money up against the wall with silly mods.

No I don't have a spare granite rock to hit my head with, at least not one the right shape to make me believe you.

I believe there are already plenty of front mount advocates past and present running much slower times than me to make the point your looking for. In fact you have one of those cars :)

well the cam will be good if you match it up to an ecu remap.

It's very easy to put the cam gear on, do that yourself. Then take it in to get a remap with the cam timing setup while your at it.

Is the exhaust all the way from the turbo back?

The flywheel/clutch mod is a good one too.

Hehehehe

"And the prize for the most entertaining post in a

intercooler catagory goes to.... *rustle of envelope*...

Originally posted by rev210

I don't love my stock cooler, Paul has un-natural ideas about having relations with automobiles and their parts that we don't all share.

The idea is match your flows and you get go. Mismatch the flow and you go slow. (thankyou Doctor Zeus) so don't go slow with flow cost dough crap, when you can be a flow-match-go chap.

The GTR cooler is about the right upgrade for a stock turbo if you like to hit your head with rocks and eat poisonous mushrooms, cause only then will you seem to get a quicker time.

Good ole Dr Zeuss :)

rev210!

So if I have heard right your suggestions are to run your RB better before running it harder, alot of owners seem to talk about "boosting", but for a stock r33 is this the first thing we should be looking at? I like you idea's ie, flow matching, cam gears, ecu remaps etc.... Minor intelligent mods and not the big dumb expensive mods most go on about! Even if you have the money for the big mods you still need to think about your plan of attack as we all wont the most bang for our buck at the end of the day. Like you have pointed out there are a few other things you could spend your I/C money on first.

:)

raasclaat : Get the hybred front mount if places are not stuffing you around you should be able to get it piped and installed for 1400, you have to bargain with them, im talking 800 for the cooler dont pay more, and 600 for the install, you dont have to go to a tuning house back yarders do just as good job, usually heaps cheaper. Then add some timing and up the boost and you will be beating rev210 and this conversation will be over. some type of boost cut etc defender will be needed, there are some people that will do this to the ecu for pretty cheap.

Or you could put in cam gears, untuned. yeah that would be good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...