Jump to content
SAU Community

Recommended Posts

Obviuosly manual.

Anything rwd with decent power. I'm assuming that you don't have a skyline?

No your mum's auto vn commo will not drift well.

Basically, any turbo skyline/silvia/rx7 etc etc will drift ok

na cars can be drifted more and require more skill.

General mods required:

mech diff (a must, once you move from the stock viscous to a mech, you'll notice the diff. When the stock one single wheels, you'll lose control)

suspensions

seat and harness are nice, so you aren't always triyng to brace yourself off the door etc.

stock power is enough to learn on, but air filter, exhaust, highflow cat, fmic won't hurt.

oil cooler depending on how hard you drift (on a 31 degree day, my r33 was starting to get hot, but I drive hard)

camber, castor, swaybars etc.

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723431
Share on other sites

RX7's ARE NOT GOOD FOR STARTING TO DRIFT IN.

The only cars you should be looking at are S13 Silvias or maybe DR30/31 Skylines. Someone may be able too drop futher info on those skylines for you compared too the S13.

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723451
Share on other sites

anyone watch serious performance 7 i htink.. when the drifter got into the stock auto VT and piled in 4 mates too..... i think it was adam newton if im not mistaken, he did alright, and would have done 100 times better if he had just an LSD

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723475
Share on other sites

thanks man naa not yet but yer im lookin for a skyline though im from wa as well where r the drift practice days

check out

www.driftwa.com

or

http://westdrift.com/

you will get all the information you need on where to drift in perth and how much it will cost you :)

AndyMac: it doesnt matter what car you have, althou you think an rx7 will be hard to learn in, other people may fine it quick easy;

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723479
Share on other sites

anyone watch serious performance 7 i htink.. when the drifter got into the stock auto VT and piled in 4 mates too..... i think it was adam newton if im not mistaken, he did alright, and would have done 100 times better if he had just an LSD

Anything can be drifted. My last rental vt commo was pretty fun even though it was auto.

like It was said above, it's how well it drifts, and how easy it is to learn.

What's wrong with rx7s?

My friends fd is very easy to drift. Stock, they're pretty neutral in terms of over/understeer.

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723484
Share on other sites

' date='3 Dec 2006, 08:22 PM' post='2723479']

check out

www.driftwa.com

or

http://westdrift.com/

you will get all the information you need on where to drift in perth and how much it will cost you :)

AndyMac: it doesnt matter what car you have, althou you think an rx7 will be hard to learn in, other people may fine it quick easy;

thanks man i wil have a look at them

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723493
Share on other sites

manual r31 skyline

pull out diff centre, weld it up

has n/a rb30 so enough torque to go for gold. if you get desperate for more power just whack on vl turbo setup. then it'll tyre fry no worries

and some average to half decent shocks money permitting

can even chuck in s13 front arms to go down the s13 coilover route

live axle so its fun to drift with. no hicas or irs dramas

fatz from this forum can prove they are good to go for a cheap weekend fun car ---->

cheers, MARK

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723510
Share on other sites

Get an NA car weild the diff....stiffen it to buggery...have a manual and a handbrake that works really well. A corolla with a 4age is fun......a skyline is fun but tends to steer out of a drift cause of the HICAS (remove it and its good). Learning in an underpowered car can teach you to take the right line a speed, can get your confidence up, with a turbo car you can have other problems.

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723511
Share on other sites

fatz from this forum can prove they are good to go for a cheap weekend fun car ---->

lol look at all that body roll, im guessin its still got stock suspension..... any more info on that car?

nice to see the vid stopped right before he speared off the track in that first bit of the clip

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723577
Share on other sites

lol look at all that body roll, im guessin its still got stock suspension..... any more info on that car?

nice to see the vid stopped right before he speared off the track in that first bit of the clip

That vid was taken when it was a stock standard R31 Silo, prob with a welded diff.....

this is what they did to it :dry:

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2724100
Share on other sites

  • 3 weeks later...
  • 2 weeks later...

Just wait till it rains and take your shit box auto commy out and learn that way. Thats what i did i got a feel for drift first then started to progress from there. Then when you progress more then mods start comming from what you know you and your car needs to feel right.

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2784876
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...