Jump to content
SAU Community

Recommended Posts

Obviuosly manual.

Anything rwd with decent power. I'm assuming that you don't have a skyline?

No your mum's auto vn commo will not drift well.

Basically, any turbo skyline/silvia/rx7 etc etc will drift ok

na cars can be drifted more and require more skill.

General mods required:

mech diff (a must, once you move from the stock viscous to a mech, you'll notice the diff. When the stock one single wheels, you'll lose control)

suspensions

seat and harness are nice, so you aren't always triyng to brace yourself off the door etc.

stock power is enough to learn on, but air filter, exhaust, highflow cat, fmic won't hurt.

oil cooler depending on how hard you drift (on a 31 degree day, my r33 was starting to get hot, but I drive hard)

camber, castor, swaybars etc.

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723431
Share on other sites

RX7's ARE NOT GOOD FOR STARTING TO DRIFT IN.

The only cars you should be looking at are S13 Silvias or maybe DR30/31 Skylines. Someone may be able too drop futher info on those skylines for you compared too the S13.

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723451
Share on other sites

anyone watch serious performance 7 i htink.. when the drifter got into the stock auto VT and piled in 4 mates too..... i think it was adam newton if im not mistaken, he did alright, and would have done 100 times better if he had just an LSD

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723475
Share on other sites

thanks man naa not yet but yer im lookin for a skyline though im from wa as well where r the drift practice days

check out

www.driftwa.com

or

http://westdrift.com/

you will get all the information you need on where to drift in perth and how much it will cost you :)

AndyMac: it doesnt matter what car you have, althou you think an rx7 will be hard to learn in, other people may fine it quick easy;

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723479
Share on other sites

anyone watch serious performance 7 i htink.. when the drifter got into the stock auto VT and piled in 4 mates too..... i think it was adam newton if im not mistaken, he did alright, and would have done 100 times better if he had just an LSD

Anything can be drifted. My last rental vt commo was pretty fun even though it was auto.

like It was said above, it's how well it drifts, and how easy it is to learn.

What's wrong with rx7s?

My friends fd is very easy to drift. Stock, they're pretty neutral in terms of over/understeer.

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723484
Share on other sites

' date='3 Dec 2006, 08:22 PM' post='2723479']

check out

www.driftwa.com

or

http://westdrift.com/

you will get all the information you need on where to drift in perth and how much it will cost you :)

AndyMac: it doesnt matter what car you have, althou you think an rx7 will be hard to learn in, other people may fine it quick easy;

thanks man i wil have a look at them

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723493
Share on other sites

manual r31 skyline

pull out diff centre, weld it up

has n/a rb30 so enough torque to go for gold. if you get desperate for more power just whack on vl turbo setup. then it'll tyre fry no worries

and some average to half decent shocks money permitting

can even chuck in s13 front arms to go down the s13 coilover route

live axle so its fun to drift with. no hicas or irs dramas

fatz from this forum can prove they are good to go for a cheap weekend fun car ---->

cheers, MARK

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723510
Share on other sites

Get an NA car weild the diff....stiffen it to buggery...have a manual and a handbrake that works really well. A corolla with a 4age is fun......a skyline is fun but tends to steer out of a drift cause of the HICAS (remove it and its good). Learning in an underpowered car can teach you to take the right line a speed, can get your confidence up, with a turbo car you can have other problems.

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723511
Share on other sites

fatz from this forum can prove they are good to go for a cheap weekend fun car ---->

lol look at all that body roll, im guessin its still got stock suspension..... any more info on that car?

nice to see the vid stopped right before he speared off the track in that first bit of the clip

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2723577
Share on other sites

lol look at all that body roll, im guessin its still got stock suspension..... any more info on that car?

nice to see the vid stopped right before he speared off the track in that first bit of the clip

That vid was taken when it was a stock standard R31 Silo, prob with a welded diff.....

this is what they did to it :dry:

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2724100
Share on other sites

  • 3 weeks later...
  • 2 weeks later...

Just wait till it rains and take your shit box auto commy out and learn that way. Thats what i did i got a feel for drift first then started to progress from there. Then when you progress more then mods start comming from what you know you and your car needs to feel right.

Link to comment
https://www.sau.com.au/forums/topic/145796-drifting/#findComment-2784876
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...