Jump to content
SAU Community

White Faced Gauges


Adz2332
 Share

Recommended Posts

Has any one fitted white faced gauges to there car before? I have a R33 series 2 and on ebay you can pick up white faced gauges for $75 plus shipping. But the thing is how hard are they to fit? Is it something i can do myself? and has anyone done it before? also are the legal to have? (cos everything these days is illegal!)

Thanks

Link to comment
Share on other sites

Has any one fitted white faced gauges to there car before? I have a R33 series 2 and on ebay you can pick up white faced gauges for $75 plus shipping. But the thing is how hard are they to fit? Is it something i can do myself? and has anyone done it before? also are the legal to have? (cos everything these days is illegal!)

Thanks

Adz,

I personally have white faced guages installed in my Series Two. To install:

1. Remove dash surround and remove dash cluster.

2. Unclip the front clear panel and expose the black bezel.

3. Remove bezel to expose guages.

4. The guage faces will have an enlarged center hole to slide over the needles... and sit over existing faces. For boost, you have to remove the tacho by unscrewing it from the back and pulling out from the front. The whole assembly should come out. (NOTE: DO NOT REMOVE NEEDLES)

5. Depending whether your faces are EL, remove all lighting bulbs except for warning lights and the one down the bottom right.

6. Again if EL, feed wires through where the bulbs used to do and hook up to 12 volt source (headlights)

7. Re-assemble and put back in.

8. You now have a sexy new dash.

Any more questions, give me a yell.

Cheers,

-Bman

Link to comment
Share on other sites

i am after a set of these for my car but they only make them for GTS-T's =[

i COULD put the GTS-T ones in my car, but that is major wank factor concidering it will have the turbo gauge there... and no needle...

if anyone comes accross any for a GTS please pm me.

kthx

josh

Link to comment
Share on other sites

ive got the white face for the dash cluster. but with mine its just all white and glows blue or green. it was a pain to put in because i had to take the needles off and it is a bitch to get them back on, spot on the right spot (adv to have a digital speedo and tacho).

but the rest was easy. just a mater of taking it apart, sticking them on, hooking up the wires, placing the dimer and back together again.

Link to comment
Share on other sites

what will they fit in??

And also, these NISMO white faced gauges are 320kph and 11 grand tacho, as opposed to the stock 180kph and 9 grand tacho. Do you have to change cogs/gears at the back or somethin??

Sorry if this has been covered before, just wondering

Link to comment
Share on other sites

Bman how much were your ones, and where did you get them ?

Alex_r33: They were about $90.00 + Postage

Josh: Im sure they do make them for the GTS's aswell, I got mine off ebay, have a look on there and try searching for EL GUAGES or similar and you should have some luck.

xtra.5: I didn't see the nismo guages until after I purchased these.... Should have waited a little while longer. :miner:

Cheers

Link to comment
Share on other sites

  • 3 weeks later...

What if u just bought the whole instrument cluster? Would that re-calibrate it......i was thinking this, before when tossing up between the 320 vs 180 white faced dials. got the 180 cause seriously how often do u go above that. and on the drag strip u get told how fast u were going anyway! Plus personally i think they look better with just the middle lighting up and being able to jump between blue and green just by pressing a button.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • You won't make it out of your driveway. Both your rear wheels will go in whichever direction they feel. Your Hicas rack or a lockout bar is required to keep your wheels straight. 
    • Updating results.  Using ATR45SS-0 model VS UHF57-900. Those two are very different turbos, different wheels sets with different wheel hub profiles but yet with almost identical result. I’m intrigued with both turbos performance. ATR45SS-0 was a 61mm turbo first developed in May 2020, UHF57-900 was a 62mm turbo developed in March 2024 as a powered up alternative of a G30-900. On paper ATR45SS-0 maxed at 563rwkws, while UHF57-900 maxed at 568rwkws. ATR45SS was slightly more responsive with slightly better power band through the mid range.  Road driving ability, ATR45SS-0 had better throttle response, felt more robust under throttle, as it wakes up earlier. I think G series wheel hub design made it to have higher inertia under light throttle. Doing bit more prototype work in the next few weeks, will update result when its back on dyno again. ATR45SS0 Blue, UHF57-900 Red Chequered tuner's Dynapack hub dyno, E85 fuel. Mod list is in video below video_20240604_114214.mp4    
    • Did you run the power cables for the mac valve to the other side of the car near the fusebox? Utilizing the stock boost controller cables? or did you run new ones?
    • Hey I have a potentially stupid HICAS question 🤣 I'm currently doing a full hicas delete, Power steering pump modified to non hicas, all lines removed from the car along with all electronics. My stupid question is - Do I need a lock out bar? is there any reason why I cant just remove everything from the rear end? I already have a lock out bar but thinking to save a few extra grams I could also get rid of the arms and tie rods as well and just run it with nothing in its place? or would it have a negative effect on handling?
    • Hi how are you guys?  I know i have been absent for years but im coming back slowly guys just wondering if anyone know where the ball joint on the NISMO arm front and rear can be replaced with OE parts?  Also  i know this is not the thread looking for springs and blistein shocks for the 260rs. Please advcie     cheers    yudy
×
×
  • Create New...