Jump to content
SAU Community

Recommended Posts

some rare cars so i had to add this

photo15_zps657ca403.jpg

wins the internet

actually been meaning to PM you, do you have any pics of your Z-tune diffuser off the car by any chance? or an underside pic perhaps when it's been on a hoist? interested to see the difference between the normal and Z-tune diffusers

A genuine nismo s-tune? lol. This is the fake car that rocked up at the lowdown showcased in sydney. Another one brought in by extreme motorsports to go with the fake nur that other sau'ers will be familiar. I am a huge fan of genuine nismo cars but this isnt one of them. End rant

Seems like you are good at talking Sh!t Mate... The S-Tune is genuine and the so called "fake" nur is my personal car that i have owned for over 2 years, if you have a issue with it, or myself you can tell me now.Who are you to tell me what badge i can have on my car, and for the record the car does have a Nur motor with a fair bit of work done to it and despite bullcrap going around the car was never up for sale since iv onwed it.

Seems like you are good at talking Sh!t Mate... The S-Tune is genuine and the so called "fake" nur is my personal car that i have owned for over 2 years, if you have a issue with it, or myself you can tell me now.Who are you to tell me what badge i can have on my car, and for the record the car does have a Nur motor with a fair bit of work done to it and despite bullcrap going around the car was never up for sale since iv onwed it.

Post some pics I would love to see the car and ill know if its a nur as I used to own one

I might put some pics up soon it's a vspec 2 with nur running gear and half the nismo catalogue, I also know what a nur looks like..

I'm over people talking crap.

Post some pics I would love to see the car and ill know if its a nur as I used to own one

Edited by hypo32

I might put some pics up soon it's a vspec 2 with nur running gear and half the nismo catalogue, I also know what a nur looks like..

I'm over people talking crap.

Isn't it just a vspec II with a NUR sticker? That's from an outside view lol?

I notice the arc box, greddy hard pipe kit and oil lines (remote oil cooler). What other mods have u done?

Not my car Marko but this Nur (of God_speed's) also has...

* Torq-Lite carbon fibre prop shaft

* Nismo-Yamaha chassis dampers

* Ikeya adjustable control arms

* Nismo 19"x10.5" rims

* Ohlins top spec Coilovers

* Nismo Titanium exhaust

* Motec M800 ECU

* Nismo-Omori Titanium strut brace to replace the Kansai soon

* Trust hi capacity intercooler

* Nismo genuine skirts/pods

* Nitto oil pump

* Nismo kill switch cig lighter

* Jun cams and cam gears

* Nismo R-Tune C/F bonnet

* ATS triple plate carbon clutch

* Nismo genuine C/F rear wing blade

* Brembo big brake kit

Methinks you've seen this car before?

Will appear again this year in one of the car magazines + see next post.

Anyway, I'm impressed!

* NB This Nur to my knowledge had never appeared on SAU before 2012: but it did do a 10.9 at Cootamundra in 2009

*EOI

Terry-331.jpg

This Nur may be able to make an appearance next to Bobby's Z-Tune at J.E.M. on Wednesday 24th April if any SAU.NSW Members are interested?

This will be open to Members only at first!

So does anyone here in NSW want to see the Nur (above) and the Z-Tune on hoists?

Stay tuned to NSW > Events > Thread starts in March.

Many thanks must go to Bobbyr34 and other staff at J.E.M. for helping with SAU.NSW to stitch this together.

The SAU.NSW Tech Night will be about "Engine Builds".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...