Jump to content
SAU Community

Recommended Posts

Here we see the elusive GeeTeeTee trying to grab traction in the wild

:rofl: I even read that in the narrators voice lolz

Faster than a speeding billet, leaps tall culverts in a single bound: look, it's a bird: it's plane: it's SuperMat!!!

(Now that's Sigworthy Mat!)

Tempting :yes:

Car looks nice Peter.

Smoking it up as always Mat.

Haha looks like a couple of tv shows in the making :)

Always ;) I worked out straight line standing starts are not my thing, i better practice cornering instead lol

  • Like 1

I guess before I said something about Rego plates I should have put my car on the post , so here it is :unsure:

I will swap for your RED one , it is stunning :wub:

attachicon.gifNISMO1.JPGattachicon.gifNISMO1 (2).JPG

I hate my car atm so its all yours haha

I just noticed you dont seem to have a front or rear diffuser on your GTR does this mean its a non v-spec?

I hate my car atm so its all yours haha

I just noticed you dont seem to have a front or rear diffuser on your GTR does this mean its a non v-spec?

Yes, it is not a V-spec, I asked a couple of times on different posts about this and also asked if I take the logo off , will it stuff the paint up.

Just had one reply so far that said if I use a heat gun/dryer that I should be able to take it off without damage???

I do not want bullsh@t on my car, it was there when I bought it, probably added a few $s for DHs like me, but I did not know any better and if I did would not have cared, just loved the Rs, it will be my last car and I intend to enjoy it :yes:

Next week this car will be around 370KWAW as a daily , it should have much more response and kick in about 3k , the motor has enough internal mods to take it to 800HP with a new fuel system , so I do not think I need to boast by putting a BS logo on the back bumper, sure do LUV it , do I have to take it OFF :blush:

I hate my car atm so its all yours haha

I just noticed you dont seem to have a front or rear diffuser on your GTR does this mean its a non v-spec?

OK I will take it :action-smiley-069: Just love to put it in my lounge room :wub:

I took the front and back diffusers off as they are useless for a DD , cannot get up my driveway :no: I also cannot lie straight in bed :woot:

Will post the new Dyno readouts next week , has to be better than this

post-52098-0-62051600-1397114695_thumb.png

Sh@t, just wrote a long post and lost it in cyber space, BUT I said I would have taken any of the Rs, I loved the look, the history of this machine and its ability to be Modified :wub:

I said I would never buy a black car because they are HOT and get DIRTY when you just look at them BUT look like a million $s when clean, do not blink or you will miss the moment :woot:

I think I would like to change the wheels, like the black but I think a little bling looks good down low, any suggestions :action-smiley-069:

post-52098-0-47329400-1397119273_thumb.jpg

Black is a good look and I got to luvit, but I think I would prefer to change the rims but running out of $ so that might be a while , maybe I they will grow on me :yes:

Lowering it, funny you should say that, when I have been driving around 3 or 4 blokes gave me the :thumbsup: but signed me to lower it, now you have got me looking at it again, haha

I asked at the shop when I dropped it in about lowering it and he said it is not far off legal now , is it 100mm to the lowest point? I know it is higher than my 350GT because I can get up my driveway easier in the R34. I think there is a trade off between looks and bad road conditions??

Also, up here the potholes and lumps on the roads can be a pain and the road I like to drive the most is one of the worst , good straights and lots of windy sections but crappy road surface in sections and it changes all the time because they patch it , it rains and stuffed again :rolleyes: I have done 2 tyres on the 350GT on this road, bloody potholes :rant:

I will ask the shop how much can I lower it, the cops up here are pretty hard on some mods especially if they can see them :teehee:

Yes, it is not a V-spec, I asked a couple of times on different posts about this and also asked if I take the logo off , will it stuff the paint up.

Just had one reply so far that said if I use a heat gun/dryer that I should be able to take it off without damage???

I do not want bullsh@t on my car, it was there when I bought it, probably added a few $s for DHs like me, but I did not know any better and if I did would not have cared, just loved the Rs, it will be my last car and I intend to enjoy it :yes:

Next week this car will be around 370KWAW as a daily , it should have much more response and kick in about 3k , the motor has enough internal mods to take it to 800HP with a new fuel system , so I do not think I need to boast by putting a BS logo on the back bumper, sure do LUV it , do I have to take it OFF :blush:

yeah not too long on the heat gun just enough to soften up the glue (too much will dmg stuff and potentially warp the plastic if you go crazy)

Lift an edge and peel slowly re applying heat if necessary but probably wont need to.. If you want to be anal and can manage it some fishing wire will help get it off easier too

Will definately look alot better without it as its not a genuine sticker.

I've always wanted a set of diffusers but fark paying insane money for them! Goodluck with the retune, Joey has been telling me about it here and there

Thanks Dave , I will take the heat to it when I get it home next week. Fishing wire, you mean run it under the sticker after I lift the end? Why do they put this BS stuff on, just made me mad when I found out it is fake because I am worried about the paint trying to get it off :blush:

I have only found a couple of RED R3s on the web , one was in East Germany, Your pics were the best :thumbsup: was this a standard colour in the R3 range,only had one red car a TT300ZX , just loved it and a ton of fun :geek:

Joey has been a great help and being able to PM him made it easy for me as I know I have asked some dumb questions, poor Joe, haha. Getting help from you blokes has made it so much easier trying to get the results I am after, I will know if it worked out as expected next week and will post the Dyno results to get your collective input :thumbsup: More important I will tell you how it drives now as that is the test for me :happy:

I have had over 20 cars but never really got into them like this and I am enjoying it. It will probably be my last car, what a way to go out :banana: :banana: :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...