Jump to content
SAU Community

Recommended Posts

Thursday night run.

We did this run a few months back and was a pretty outcome of skylines (8 of them).

Meet: Eight Mile Plains Bus Station Car Park @ 8PM

Depart: Leave at 8:30 and onto Yatala BP.

Arrive: Should arrive around 9PM

Depart: Leave at 9:30 and head for Riverside area.

You'll find the Eight Mile Plains Bus Station Car park along Miles Platting Road in Eight Miles Plains.

There is 2 car parks. The one we will be in is directly across the road from the bus station.

This car park pretty much gives us direct access to the gateway that leads us onto the m1 heading for yatala.

BRING A UHF IF YOU HAVE ONE HANDY!!!!

Attending -

Myself

Shanef + possibly 1

Karen + Marc (SMR33) - possibly

phatboi2010

MagicMikeZ32

lilmike86

Silver_R34_GT-T

Ryan.R34

SLO-89

53XYN

zippo0_

Link to comment
https://www.sau.com.au/forums/topic/146799-thursday-night-run/
Share on other sites

I SHOULD be at riverside so see you all there :laugh:

Edit: May or may not be at Riverside now... Not sure where the final destination is for the cruise I'm on :)

Edited by MagicMikeZ32

was talking to friends that are part of other cruise site and there is a

cruise being held on thurday night and finishing at Riverside to at about the same time

don't know what site didn't ask.

so i vote to move it.

zippo0_

(dave)

Wish I could make it guys! But, I don't finish work until 8pm (yay last day then holidays) but then I've got a work breakup party at my place.

Ah well, take plently of photos have a great time!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...