Jump to content
SAU Community

Recommended Posts

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

hey - those charts can be remapped after the car has run - when ours were printed, the power figure was done, then they just changed the range and printed.

few questions:

- was that the only printout ? you didnt get torque or rpm or afr??

- we had a dyno day down in vic and all our bonnets were lifted, then someshit was plugged into somewhere (sorry bout the explanation)

- dyno was in shoot out mode - ours wasn't... whats the difference?

dyno1.jpg

dyno2.jpg

Cheers,

Dave

That would have been air/fuel ratios and shit yeah??

One of the car's had it put on, if you wanted the probe stuck up for exhaust they did it, but if you didn't really care, he didn't stuff around with doing it.

R33 GIRLY, I hope that post wasn't aimed at me :|

Guest Boxhead

not really ph1, like im sure the guy did look at our boost gauge, etc, he just didnt get them plotted onto the sheets, the same with afr,

as was stated before, it was done to a car on the day, but you could ask for that if you wanted,

the runner did have words to most people as he gave the keys back to them after the runs about the cars etc, so im sure he was monotoring everything..

all in all, i would have no worries going to another dyno day at that place.

mainly coz i have known the guy for a year or so

  • 2 weeks later...

Mine was done because I told him I run a lot of boost and may have detonation problems. Those there will remember my bonnet went up ad other things were connected.

The forms we filled out stated that the car had to be of a sound mechanical state. Who puts a car on a dyno day event when they know the car is not running properly.

Your car is there to have the shit revved out of it two or three times. If your car can't handle that, then you should not enter, and not the responsibilty of the organisers.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...