Jump to content
SAU Community

Recommended Posts

hey every1 (first post)

ive heard through word of mouth that as of next year skylines and s-chasis's wont be eligible for import no longer. Apparently this was because there is simply too many here. Sounds a little far fetched and unfounded, but can anyone put truth to this?

cheers

Link to comment
https://www.sau.com.au/forums/topic/147109-no-more-skyline-or-s-chasis-imports/
Share on other sites

Nah, that is a total load of rubbish - rest easy knowing that you will be able to import even more makes and models next year as the list of SEVS approved cars grows.

If they were concerned about there being too many of one model around then they can start by cutting back on Commodore and Falcon production :wave:

I heard RX7's are no longer allowed to be imported? :[

this one is true. that happened awhile ago, restricted turbo models only? im not sure on that part. but but it was series 7 and 8 models i think they stopped allowing them to be registered, not sure if it was qld only, but if i recall, resale values went up ?

Man... rumours these days are getting a little silly. Back in the day they were actually plausible rumours.

Compliance by a RAW and SEVS is a national legislation, so if you can bring one car in into VIC then you can bring that very same car into QLD. I don't see why QLD registry wouldn't allow you to register a car with the correct paperwork etc, unless the registrant had restrictions on his license etc that stopped him from doing so.

1988 and old cars however do not go through the national scheme and as such is up to the discrepancy of the engineer/registration authority of each state.

i herd from me m8 that thay are gunna be makin uz convert all japanese import carz 2 left hand drive now. does anyone herd about that 1 yet? wot will i do with all my right hand drive carz then?

me m8 also toold me that it waz funkmonkey that done it. cause of all the complaints and sh1t about rhd japanese cars in aus now.

Nah, that is a total load of rubbish - rest easy knowing that you will be able to import even more makes and models next year as the list of SEVS approved cars grows.

What cars are going to be added to SEVS?

What cars are going to be added to SEVS?

There are all sorts of models being considered by workshops at the moment and there will be even more over the coming years as new models are released in Japan too. here are a few that are in the pipeline at the moment:

Mitsubishi Galant VR-4 (EC5A)

http://www.j-specimports.com/dealernet/det....php?id=1544927

http://www.j-specimports.com/dealernet/det....php?id=1485628

http://www.j-specimports.com/dealernet/det....php?id=1449068

http://www.j-specimports.com/dealernet/det....php?id=1449067

Mitsubishi Legnum VR-4 (EC5W)

http://www.j-specimports.com/dealernet/det....php?id=1524738

http://www.j-specimports.com/dealernet/det....php?id=1534970

http://www.j-specimports.com/dealernet/det....php?id=1510869

http://www.j-specimports.com/dealernet/det....php?id=1543165

http://www.j-specimports.com/dealernet/det....php?id=1513482

Mitsubishi Lancer GT-A EVO wagon (CT9W)

http://www.j-specimports.com/dealernet/det....php?id=1531249

http://www.j-specimports.com/dealernet/det....php?id=1417416

http://www.j-specimports.com/dealernet/det....php?id=1404968

http://www.j-specimports.com/dealernet/det....php?id=1431882

Nissan Cima - possibly President also (F50)

http://www.j-specimports.com/dealernet/det....php?id=1534632

http://www.j-specimports.com/dealernet/det....php?id=1519180

http://www.j-specimports.com/dealernet/det....php?id=1544867

http://www.j-specimports.com/dealernet/det....php?id=1497381

Nissan Gloria and/or Nissan Cedric (Y33)

http://www.j-specimports.com/dealernet/det....php?id=1545735

http://www.j-specimports.com/dealernet/det....php?id=1541242

http://www.j-specimports.com/dealernet/det....php?id=1547116

Nissan Gloria and/or Nissan Cedric (Y34)

http://www.j-specimports.com/dealernet/det....php?id=1549757

http://www.j-specimports.com/dealernet/det....php?id=1549755

http://www.j-specimports.com/dealernet/det....php?id=1545733

http://www.j-specimports.com/dealernet/det....php?id=1547112

Nissan Fuga (Y50)

http://www.j-specimports.com/dealernet/det....php?id=1546959

http://www.j-specimports.com/dealernet/det....php?id=1534775

http://www.j-specimports.com/dealernet/det....php?id=1513294

http://www.j-specimports.com/dealernet/det....php?id=1524426

Toyota Altezza AS300 wagon (Lexus IS300)

http://www.j-specimports.com/dealernet/det....php?id=1414451

http://www.j-specimports.com/dealernet/det....php?id=1461384

http://www.j-specimports.com/dealernet/det....php?id=1432564

http://www.j-specimports.com/dealernet/det....php?id=1450099

There are plenty of others that 'could' be imported also if there was enough demand and someone was willing to put up the money for a test car, but hopefully these examples above will give you an idea of some of the newer models coming up and a little eye candy to keep you busy for a few minutes too.

  • 2 weeks later...
Are the Evo Wagons going to be available for complience in Manual?

The EVO wagon (CT9W) was only built in tiptronic automatic so and manual models around would have been manual conversions.

Most compliance workshops are saying that they will not comply cars with transmission conversions although there are a few around that have no problem with it, so it depends on which workshop gets plates for this model first.

i herd from me m8 that thay are gunna be makin uz convert all japanese import carz 2 left hand drive now. does anyone herd about that 1 yet? wot will i do with all my right hand drive carz then?

me m8 also toold me that it waz funkmonkey that done it. cause of all the complaints and sh1t about rhd japanese cars in aus now.

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...