Jump to content
SAU Community

Recommended Posts

3 points, $169

EDIT: should clear this up...

its only 3 poits for a major defect, which is maily what they give now as to eliminate imports off Victorian roads. If you get a minor one, then they usually dont fine you or lose any points but as stated its really up to the officer as to how severe the fine is.

Edited by ctjet

Not always - sometimes you can get a minor notice with no fine nor points loss... but you still need to fix the issue and present the car to VicRoads.

Not 100% on the law - but I believe this is mostly at the discretion of the officer.

Dave got a fine with his last (major) defect... i tried digging up the paperwork to see if the fine was as a result of the defect, or if it was in relation to a particular illegal modification, but I can't find it anywhere. :rofl:

I told him to fight it because he was booked by an officer on a motorbike, who removed his helmet while he gave the car a going over.... i was under the impression that once they removed their helmet, they were considered to be "out of uniform", but he decided it was easier to just shut up and pay up. ;)

LOL thats pretty funny. I'm 200% certain that they are still able to give out fines and perform their officer duties without their helmet on. Had that gone to court i'm sure the officer and judge would've been laughing for a long tome.

I've never lost points for a defect but I have got the $169 fine about 3 times while getting defected, the fine was for driving an "Unsafe Vehicle". They can take 3 points for this I think but its up to the officers descretion to take the points or not.

I've also had major defects where i didn't get fined.

The law may have changed though recently.

LOL thats pretty funny. I'm 200% certain that they are still able to give out fines and perform their officer duties without their helmet on.

Well... motorbike Police might be able to, but regular Police are improperly dressed without their hats

I just thought it might transfer across :rofl:

thx guys

so its pritty much up to the officer and if he wants to be a prick or not

wats considered a minor defect offence? like couple mods? IE cooler and boost controller? or are all mods no matter how many considered a mojor defect?

Major defect is when they get you for 3 or more things.

If you want to find out what's defectable, go check out the legal info links in the sticky thread up the top of this section.

Provided the officer identifies himself then he can quesiton you , book you etc even if he is off duty and wearing his underwear on his head. :rofl:

if that's the case, why would there be such a term as "off duty"?

Wouldn't that mean that they are "on duty" 24/7?

How would they be able to "book you"?

In order to do that, they would have to have access to the proper paperwork.

I understand that they may be considered a more viable witness in certain situations, but when it comes to an off duty Police officer, don't you and I have exactly the same amount of power that they do?

On TV, off duty policemen can kill hundreds of people - say they are all bad, and get off scott-free (and usually hook up with some strumpet ex-hooker with a heart of gold).

Troy wears his underpants on his head quite regularly, so I'd be inclined to believe him. Note the part about identifying themselves as an officer (and no doubt flashing the 'ol warrant badge around)? - I'm sure he'd be able to stay off duty, dropping pints and betting on the dish lickers if he kept his yam shut.

That said - I received a yellow sticker in the R. No fine, no loss of points. Just told to get my trumped up charge of the placcard not matching the load weighting on my tyres - fixed.

Well... motorbike Police might be able to, but regular Police are improperly dressed without their hats

I just thought it might transfer across ;)

I actually defeated a "failure to obey an officer" or whatever.

because he wasnt in uniform :laugh:

He didnt have

1) A hat

2) reflective vest while directing traffic

3) Shoulder lapels.

I went on the argument he looked like a hot and bothered bus driver.

And winner to me :(

The judge actually hammered him. He had been in the force for 20 years and should have known better.

Power to the people :laugh:

It sounds like you've spent more time in court than me Ash ;)

Troy wears his underpants on his head quite regularly

While you're out looking for Decemberween gifts, might I suggest that you consider buying him a hat of some sort?

Underpants as headwear is SO last year. (and it doesn't really impress the ladies) :laugh:

br-undies.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I usually source pressure on inlet manifold after throttle body
    • Where is the best location for boost pressure source when running mac 3port boost solenoid?  my new turbo does not have a fitting for that on the compressor housing.  how come Garrett make a turbo without that?  im confused 
    • From my memory, which isn't that great, we did have issues getting the large throttle body on my old LS1 to play nicely at idle, first it would stall, then it would only idle at 2k rpm, then it would hang at 2k rpm for a few seconds and then drop and stall, then, finally, the best we got was it would hang at 1.5k rpm for a few seconds then drop to around 800 rpm The tuner stated that large cable throttle bodies are a PITA, and if I wanted anything better than what we ended up with I would need a electronic throttle body and all of the aftermarket ECU stuff to run it
    • So, my intake arrived  I'm not happy with the coating finish so I went to Supercheap and got some black wrinkle paint and some prep stuff I was initially thinking about using grey wrinkle paint, but finding a quality product that gives the texture I want was "unfindable...", so the tried and tested black wrinkle paint is again finding its way into the engine bay for the OEM look I'll sneakily head into work and get the big ovens cranking to cure the paint over the next week or so I've also contacted MX5 Mania today to talk about the install and tune, so painting it is my "main effort" prior to sending the car off In other news, the correspondence from the US supplier is fair to midling to say the least, I'm still trying to track down the intake box thingie with the larger intake pipe to suit the throttle body, it still is "awaiting fulfilment" (no stock currently available), if it isn't here soon I'll just get MX5 Mania to fabricate up a CAI that is easy to service the air filter  
    • Thanks mate. I thought it would be that way.
×
×
  • Create New...