Jump to content
SAU Community

Recommended Posts

Ok so my alternator isn't working properly (when i have lights on or use brakes with stereo my power steering jolts and my Hicas light blinks, have tried a new battery, no help, battery diagnosing thingo at beaurepaires put it down to alternator) and i don't know what to do.

Should i replace it with a second hand one (if so where do u find these?? Jap wreckers only seem to stock engine and performance parts) Should i get one off another model car (r31 or something?) should i buy an aftermarket one? Should i get one from Nissan ($400ish i think) or get my current one rebuilt ($400ish?)

Also can it be just a cheap part of the alternator causing my problem?

Thx

Link to comment
https://www.sau.com.au/forums/topic/147179-alternator-where-how-much/
Share on other sites

Before doing all that, take the leads off the alternator and give them a good cleaning, it might just be something as simple as dirty contacts stopping a full charge getting through.

Seriously, get a hammer and hit it, and it will probably keep working for a fair while. Sounds very Datsun styles, but it actually works well.

LOL I had a Bluebird with the same problem, always had something in the boot to wack it with :O

If u decide not to rebuild give Dean a buzz @ UPI 9555 3611 im sure hed have a few lying around.

Ohh ok thanks guys, rebuild for $300 doesn't sound bad... Didn't think of cleaning the contacts, i'll try cleaning those and err wacking it with something (my favorite automotive fix.. something i actually know how to do) then if that doesn't help i'll ring the places above.

I would take it to an auto electrician but 2 that i've been to, seem to think it has nothing to do with the alternator (regardless of voltage drops and such) and say my power steering is just shagged, so i'm assuming they don't do imports. I'll post back here with what i ended up doing and the prices, might be helpful to someone else

If you pull the alternator appart yourself and take it somewhere they wont charge to removal and refit, they'll do a changeover for the alternator so they give you a reco'd one and take yours for a reasonable price (i think cheaper than $300) or if your game enough take it off and pull it appart and check the brushes if they're worn, a brush kit with the regulator is around $80, but check the coils aswell if they're cracked etc if they area you'll need to get it fully reconditioned or changeover.

Its common for just the brushes to be worn out on alternators causing the charging system to deteriorate. Melitas is good in newport i have a friend that i went trade school with that works there, also theres one in footscray truck car marine that a reasonably priced and wont screw you around.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...