Jump to content
SAU Community

Recommended Posts

Can anyone make any suggestions for where would be the best place to stay if say you were to come to Tokyo a couple of days before TAS, and then leave a couple of days after?

Plan is, I will be going to TAS on the weekend, but also want to be somewhere where I can also visit a few workshops and parts shops as well.

Any help or suggestions you can give me would be greatly appreciated. Thanks! :O

Link to comment
https://www.sau.com.au/forums/topic/147274-best-hotels-for-tokyo-autosalon/
Share on other sites

Can anyone make any suggestions for where would be the best place to stay if say you were to come to Tokyo a couple of days before TAS, and then leave a couple of days after?

Plan is, I will be going to TAS on the weekend, but also want to be somewhere where I can also visit a few workshops and parts shops as well.

Any help or suggestions you can give me would be greatly appreciated. Thanks! :wave:

Unfortunately, the best shops (or at least the most famous ones) aren't all located in the same area. Some are located out in the sticks, while others may be in the city.

I'd say find a hotel that you can afford, near things you want to see or do (or at least in the same general region) before coming. If you want to be near TAS, then you'll want to stay somewhere in Chiba (like Makuhari, Tsudanuma, Chiba, or Funabashi). Otherwise, if you don't mind taking the train and would rather be in Tokyo, there are plenty of good spots all over the city. I've used business hotels in the past and they've been fairly good for what you pay.

Good luck!

just find a hotel very close to a station on a JR line. or try the new otani in makuhari if you want to be close to auto-salon. it's supposed to be very nice. but be aware that auto-salon (makuhari) is no where near tokyo city. it's about 1hr train ride.

You're all gonna laugh probably, but I got lazy and decided to stay in a great business hotel I stayed at last time near Roppongi. Thing is though, I am gonna be there for about a week (with the TAS weekend in the middle of my stay). And as you mentioned Beer Baron, it's a couple of mins walk to a train station. And I don't mind the trip to TAS, I think it's best to be staying in Tokyo so you can go out at night and do stuff.

Now, who's keen to go out for some food and drinks in Roppongi one night with me? :)

Edited by RaceBorn
You're all gonna laugh probably, but I got lazy and decided to stay in a great business hotel I stayed at last time near Roppongi. Thing is though, I am gonna be there for about a week (with the TAS weekend in the middle of my stay). And as you mentioned Beer Baron, it's a couple of mins walk to a train station. And I don't mind the trip to TAS, I think it's best to be staying in Tokyo so you can go out at night and do stuff.

Now, who's keen to go out for some food and drinks in Roppongi one night with me? :)

Get on the list: http://www.skylinesaustralia.com/forums/in...howtopic=134543

Best is to stay in central Tokyo. It is easy enough to get to Nismo, TS, etc from there.

Always up for a night in Roppongi. :)

We are going from 10 to 18 of January.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...