Jump to content
SAU Community

Recommended Posts

Guest SXU29T

just wanted to know your opinions on weather a jap spec s15 and a aus s15 with very similar mods be making the same power on 98 octane aus fuel, i know that jap models do run more boost then aus models 10psi to 8psi standard but if both the jap and the aus s15 have identical mods say exausht, filter and run identical boost say 14psi do you think that the import will still blo the aus spec? or will it be line ball?

Link to comment
https://www.sau.com.au/forums/topic/14731-jp-spec-s15-vs-aus-spec-s15/
Share on other sites

Guest SXU29T

mine is an aus spec its just that my girlfriends friends boyfriend has a jap spec and wants to race me of the street that is! and i just want to know what im letting my self into. Ive also heard bout the different turbo thing but i think that all auto s15s lack the bbturbo and super helical lsd, ive also been told that aus spec r's and aus spec s's have diff turbos??? the former being bb? also heard that s2 s14's came with bbturbo std?

If you tune yours up SXU29T, you should be able to match a jap-spec one... the aussie one is just detuned.. replace a couple of small things and up the boost (you can go fair bit higher than 10) and it should be pretty equal.

Sneak in a PowerFC while you're at it to kick his butt :D

Guest Works Auto

Ive driven both aussy spec and jap spec and honestly on the road you can't feel any difference. there very similar.

The aussy spec still has a ball bearing turbo. I was also sure that the injectors were exactly the same and the power difference was in the more aggressive timing on the jap model.

I have been in both as well, and driven both, thou, one was a dealer car (the Aust. Spec)

The Jap Spec is much better car. The interior has nice extras, and there are a few differences.

ECU is suppose to be different for the jap higher spec fuel, the Aus Spec has 420cc inj. Jap Spec has 480cc inj. The exhaust is different I believe (evened out in mods, thou, I'd check the dump pipes on each if they haven't been changed.) Possible Gearbox, Diff and and standard clutch differneces. (gearbox and diff ratios i mean - esp diff.)

the 45 extra kilowats is noticable.

A bit.

Upgraded Carpet, factory boost gauge, TV optional, better stereo system, original "s" on the steering wheel, leather optional, climate control, a few other plasticy bits here and there.

  • 1 year later...

i think on the seats of the JDM s15 its say silvia on the seats

the main difference with the jap ones is they run a different fuel map and boost factory as weel, due to the higher 100 RON fuel in japan.

That would explain why a slightly moded jap spec will spank an aussie version with the same mods. however start changin the oz spec engine managment and u have the identical car!

also the jap spec ones lose value almost twice as fast due to being an *import*

but i don tknow personal opinon

im planing to buy one pretty soon

Jap spec has a rear wiper too, thats one of the main was to tell. I bought an Aus spec mainly because it was newer, had one owner, had FULL service history and because i knew the power difference would be slight but add an exhaust and a filter and you would make the same gains as the jap spec and be even(because Aus spec exhaust is more restrictive). Factory boost gauge on Jap spec doesnt look as good as a Greddy pillar and only holds one gauge, i didnt see much difference in interior between the two.

i think on the seats of the JDM s15 its say silvia on the seats

the main difference with the jap ones is they run a different fuel map and boost factory as weel, due to the higher 100 RON fuel in japan.  

That would explain why a slightly moded jap spec will spank an aussie version with the same mods. however start changin the oz spec engine managment and u have the identical car!  

also the jap spec ones lose value almost twice as fast due to being an *import*  

but i don tknow personal opinon

 

im planing to buy one pretty soon

I think you pretty much summed it up. So what you gona go for the aus or jdm?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...