Jump to content
SAU Community

Recommended Posts

cougarace.jpg

Mazda scrapping all vehicles aboard capsized Cougar Ace

Mazda just announced that it has decided to scrap all 4,703 vehicles that were aboard the Cougar Ace cargo vessel when it nearly capsized off the Aleutian Islands in Alaska back in late July. The shipping vessel sat listing to one side for over a month before it was towed to and repaired at a port in Oregon. During that time, the vehicles on board, comprised of the Mazda3 small car and CX-7 crossover, were tied down at severe angles. Mazda had previously told us it would inspect all the vehicles and sell most as used with full disclosure, considering that many showed little or no signs of damage. Regardless, Mazda reconsidered and the announcement that the entire shipment would be scrapped came today from Jim O'Sullivan, Mazda North America's President and CEO.

The decision not to sell any of the vehicles that were aboard the Cougar Ace must have been difficult to make, considering that we estimate the hull of the ship contained over $103 million worth of vehicles (60 percent of the vehicles on board were the more expensive CX-7, so we assumed a conservate per unit average MSRP of $22,000). Not that we're criticizing Mazda for scrapping the entire shipment, but the destruction of 4,703 vehicles, at least some if not most of which are salveagable, seems like a waste. We're sure there are plenty of non-profit organizations and charities that would be grateful to take these vehicles off of Mazda's hands

PRESS RELEASE:

All Mazda Vehicles From Car-Carrying Vessel

Cougar Ace to be Scrapped

IRVINE, Calif.--Mazda Motor Corporation today announced that all of the U.S.- and Canada-bound Mazda vehicles from the car-carrying vessel, Cougar Ace, which nearly capsized off the Aleutian Islands in late July, would be scrapped.

"After thorough testing by engineers from our American and Japanese R&D centers, we decided the most appropriate course of action – with our customers foremost in mind – was not to sell any of the 4,703 Mazdas aboard the ship," said Jim O'Sullivan, President and CEO of Mazda North American Operations, based in Irvine, Calif.

The Cougar Ace sat listing at more than 60-degrees for nearly a month after an incident at sea, before it could be towed to the Port of Portland, Ore., for repairs and to have its cargo off-loaded.

O'Sullivan added that although some of the Mazdas aboard the Cougar Ace showed little or no visible damage from being tied-down at severe angles for an extended period, the company reconsidered its initial decision to sell any of the vehicles as used.

"We always put the customer first," O'Sullivan continued. "This drove our decision to scrap every one of the Mazdas involved in this incident. None will be sold as used cars."

Headquartered in Irvine, Calif., Mazda North American Operations oversees the sales, marketing, parts and customer service support of Mazda vehicles in the United States, Canada and Mexico through nearly 900 dealers. Operations in Canada are managed by Mazda Canada, Inc., located in Ontario, Canada, and in Mexico by Mazda Motor de Mexico in Mexico City.

Link to comment
https://www.sau.com.au/forums/topic/147571-such-a-waste/
Share on other sites

they should have evened the cars out and not put all the cars to the left side of the ship.....

edit: though its a huge waste, all that metal can be recycled - i hope

Edited by emsta2003
Link to comment
https://www.sau.com.au/forums/topic/147571-such-a-waste/#findComment-2754269
Share on other sites

That was similar to the one in the English Channel about 4 years ago full of BMW's, Audi's and Merc's going from Germany to the UK. Had about 20mil pounds worth on board but that actually sank and water is one of the things that sadly doesnt leave much of the car useable. :)

Link to comment
https://www.sau.com.au/forums/topic/147571-such-a-waste/#findComment-2754277
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...