Jump to content
SAU Community

Recommended Posts

cougarace.jpg

Mazda scrapping all vehicles aboard capsized Cougar Ace

Mazda just announced that it has decided to scrap all 4,703 vehicles that were aboard the Cougar Ace cargo vessel when it nearly capsized off the Aleutian Islands in Alaska back in late July. The shipping vessel sat listing to one side for over a month before it was towed to and repaired at a port in Oregon. During that time, the vehicles on board, comprised of the Mazda3 small car and CX-7 crossover, were tied down at severe angles. Mazda had previously told us it would inspect all the vehicles and sell most as used with full disclosure, considering that many showed little or no signs of damage. Regardless, Mazda reconsidered and the announcement that the entire shipment would be scrapped came today from Jim O'Sullivan, Mazda North America's President and CEO.

The decision not to sell any of the vehicles that were aboard the Cougar Ace must have been difficult to make, considering that we estimate the hull of the ship contained over $103 million worth of vehicles (60 percent of the vehicles on board were the more expensive CX-7, so we assumed a conservate per unit average MSRP of $22,000). Not that we're criticizing Mazda for scrapping the entire shipment, but the destruction of 4,703 vehicles, at least some if not most of which are salveagable, seems like a waste. We're sure there are plenty of non-profit organizations and charities that would be grateful to take these vehicles off of Mazda's hands

PRESS RELEASE:

All Mazda Vehicles From Car-Carrying Vessel

Cougar Ace to be Scrapped

IRVINE, Calif.--Mazda Motor Corporation today announced that all of the U.S.- and Canada-bound Mazda vehicles from the car-carrying vessel, Cougar Ace, which nearly capsized off the Aleutian Islands in late July, would be scrapped.

"After thorough testing by engineers from our American and Japanese R&D centers, we decided the most appropriate course of action – with our customers foremost in mind – was not to sell any of the 4,703 Mazdas aboard the ship," said Jim O'Sullivan, President and CEO of Mazda North American Operations, based in Irvine, Calif.

The Cougar Ace sat listing at more than 60-degrees for nearly a month after an incident at sea, before it could be towed to the Port of Portland, Ore., for repairs and to have its cargo off-loaded.

O'Sullivan added that although some of the Mazdas aboard the Cougar Ace showed little or no visible damage from being tied-down at severe angles for an extended period, the company reconsidered its initial decision to sell any of the vehicles as used.

"We always put the customer first," O'Sullivan continued. "This drove our decision to scrap every one of the Mazdas involved in this incident. None will be sold as used cars."

Headquartered in Irvine, Calif., Mazda North American Operations oversees the sales, marketing, parts and customer service support of Mazda vehicles in the United States, Canada and Mexico through nearly 900 dealers. Operations in Canada are managed by Mazda Canada, Inc., located in Ontario, Canada, and in Mexico by Mazda Motor de Mexico in Mexico City.

Link to comment
https://www.sau.com.au/forums/topic/147571-such-a-waste/
Share on other sites

they should have evened the cars out and not put all the cars to the left side of the ship.....

edit: though its a huge waste, all that metal can be recycled - i hope

Edited by emsta2003
Link to comment
https://www.sau.com.au/forums/topic/147571-such-a-waste/#findComment-2754269
Share on other sites

That was similar to the one in the English Channel about 4 years ago full of BMW's, Audi's and Merc's going from Germany to the UK. Had about 20mil pounds worth on board but that actually sank and water is one of the things that sadly doesnt leave much of the car useable. :)

Link to comment
https://www.sau.com.au/forums/topic/147571-such-a-waste/#findComment-2754277
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...