Jump to content
SAU Community

Very Weird Problem - Car Wont Turn Off

Simon-S14

By Simon-S14,
in General Maintenance

 Share

Recommended Posts

Simon-S14 Grand Master

Simon-S14

Posted
Posted

Ive got a very weird problem that started happening over a few weeks, and would only do it here and there now it does it 9 times out of 10 and its getting to be very annoying.

Basically my car wont stop running when i turn the ignition off... When i switch the key off and take it out all the dash lights go out, the clock dims, the stereo turns off etc but the motor keeps running... it acctually drops slightly in RPM but doesnt stop. A few times i have switched the key back and forward from off to on and the motor will stop.. but lately it just wont stop no matter how many times i jiggle the switch.. i basically have to put it in 5th and stall it to kill it.

Seems weird to me that the switch is powering everything off... except the motor/ecu etc.

FWIW i have done the fuel pump rewire mod running a power wire from the battery and a relay which is switchable from the existing fuel pump wiring... my turning off problem isnt related to this tho as it started doing it before i did the rewire mod. Plus ive wired it up properly on the relay :)

So yeah.. what could it be??

Guest rwkw

Guest rwkw

Posted
Posted

hey mate a similar thing happend to me when my car alarm stuffed up, it shorted out my turbo timer, so when i went to turn the car off, i couldnt becouse the turbo timer was in limbo land, sorta on like glowing but no info on the screen. so yeh fixed up the turbo timer and it was all good.

but anyway check ya turbo timer, may be the prob.

Ive got a very weird problem that started happening over a few weeks, and would only do it here and there now it does it 9 times out of 10 and its getting to be very annoying.

Basically my car wont stop running when i turn the ignition off... When i switch the key off and take it out all the dash lights go out, the clock dims, the stereo turns off etc but the motor keeps running... it acctually drops slightly in RPM but doesnt stop. A few times i have switched the key back and forward from off to on and the motor will stop.. but lately it just wont stop no matter how many times i jiggle the switch.. i basically have to put it in 5th and stall it to kill it.

Seems weird to me that the switch is powering everything off... except the motor/ecu etc.

FWIW i have done the fuel pump rewire mod running a power wire from the battery and a relay which is switchable from the existing fuel pump wiring... my turning off problem isnt related to this tho as it started doing it before i did the rewire mod. Plus ive wired it up properly on the relay :)

So yeah.. what could it be??

mad082 Grand Master

mad082

Posted
Posted

there is a small chance that there has been a turbo timer fitted at some stange, and when it has been removed there is some bare wire shorting out.

another possibility is that the turbo timer is still there and hidden up behind the dash. try letting the handbrake off next time it does it. if the car stops as soon as you do that then there is a turbo timer still fitted.

Simon-S14 Grand Master

Simon-S14

Posted
  • Author
Posted

thought of all that and ive looked at the ignition wiring and none of it appears to have been spliced into at any stage, handbrake and clutch dont make it stop either so that rules that out. would the actual ignition switch cause this?

SilverECR33 Veteran

SilverECR33

Posted
Posted (edited)
i don't think so, since the accessories are turning off.

no it can actually.

ahhem..

"would the actual ignition switch cause this?" YES IT CAN

the VL with same issue as yours, Accessories was also turning off, and a new ignition barrel fixed it. hello? go see an auto electrician, and he will tell you same thing.

cheers.

Edited by silverbulletR33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Piggaz
      Borg Warner EFR Series Turbo's V 2.0

      By Piggaz · Posted

      A few things that seem a bit off here. - why is there 2 BOV’s?  - the turbo smart BOV on the compressor housing, is it turned up ALL the way? I have seen this become an issue on old man Pete’s car. It would push open and recirc, turbo speed would rise and the boost pressure would do weird things. - stock head? Does that include springs? - tried a different MAC valve? Is it plumbed correctly?
    • GTSBoy
      Borg Warner EFR Series Turbo's V 2.0

      By GTSBoy · Posted

      Photo of manifold showing gate location? I mean, it's 6Boost, so we probably shouldn't be worrying, but always wroth knowing what the layout is. Plumbed back to atmosphere? Or into the dump?
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • kevboost7
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By kevboost7 · Posted

      Wow, i wish i found this sooner.
    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
×
×
  • Create New...