Jump to content
SAU Community

Recommended Posts

due to the popularity of lunatics such as mario(gtr700) and munro with there crazy gtr's

i have decided to follow in there footsteps and produce my own badass drag car

now my budget is small some may say stupidly spall ($500 to get me started)

but due to no one wanting to purchase my 1981 toyota corroler it has now become the official fatz drag car

my plans r as follows

1. cut the rust out so they will allow it on eastern creek

2. test the bastard

3. stripp the ****er and run it again

........

10 turbo the standard angine and blow the living *** out of it

11 if its still going run some NOS (fatz and furiuos style)

....

and so on

fatz drag car

now casue im a tight arse i need all your help

anything you can spare

especially if you have a rb20/25 that you feel like you need to donate to the casuse

all peaple who contribute will get there name writen on the car with no less than one genuine paint brush( in bright pink)

also if you donate this is a hands on experiment so i expect you to drive the thing

if all goes to plan we should be running 12's by christmas and 6's by easter next year.

if nothing happens ill be the dick running 20's in a shit corroler at the creek

lol

pete

and a picture to wet you mouth

Link to comment
https://www.sau.com.au/forums/topic/14878-fatzs-drag-project/
Share on other sites

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

I just cannot believe that you people are taking the pi55. We are dealing with a loose cannon here - if we don't humour hum (notice the same spelling) he mite get loaded and drive the thung on a pubic road somewhere and place the sukurity of other rode user at risk.

Pete I happily contribute 48 1981 vintage 750ml KB cans so you can get the welder out and construck the twin exit zorst same as the 31.

BUT..............................I wanna be there to watch!!

ura legend

is somebody knocking my spelling

yea all sticker r welcome.

the turbo install will be as easy as

dude to the budget nature of the car i feel that i might just g-tech it casuse that cost nothing and EC cost 50 bux

urmine- i like it TYPE FATZ

Manjanal- i might ad a WRX bonnet scoup GAFFA taped on for effect

SATO- every time dom has to drive it she says it doesnt work but when i turn the key it fires first time. funny how she always goes for the gtr first

Redline- oh where serious... lol

Bonkers- ill take your 81 kb cans... nothing that a fridge and a fine filter wont fix

i spoke to dom about this project and here oppinion was that we would be better off if someone stole it... so im guessing that is a green light boys

pete

Dino,

I was thinking that a turbo that is under 1500kgs might just be a bit small... maybe someone on the forums works for an avaition company and can pick us up an engine off a jet cheap... and 20,000L of avgas... if the engine is too much trouble then the avgas will do!!!

Imagine a jet engine sitting in the boot of THE corrie!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
    • Don't get all high and mighty. Experienced spanner wielders know exactly what effort is required to release an Oof.
×
×
  • Create New...