Jump to content
SAU Community

Recommended Posts

If Anyone can help me I was looking for some information about the ENR34 2000 non turbo model AWD system as I am thinking about purchasing this car. What I wanted to know, is it the attesa? system or constant AWD and does anyone know of any way to disable the front wheels like you can on the attesa system? Any help would be good

Link to comment
https://www.sau.com.au/forums/topic/148899-enr34-awd-system/
Share on other sites

I would put money on it being the attessa system. Nissan wouldn't R&D a new symeterical AWD system for the lower end of their market.

I scratch my head everytime someone asks how to disable the attessa system, I mean once you do - you really have a GTS with a heavy front end. One day I plan on owning my own GTR, and their is no way I would be changing the AWD system thats had millions of dollars spent in R&D on how it reacts to conditions, to adjust it to a backyarders idea of how it should perform.

Cheers

Sumo

sometimes its handy to be rwd for a bit
It's RWD most of the time! AWD is only engaged under certain conditions, like cornering, or rear-wheel slip.

Frankly, if you don't like the idea of Nissan's AWD system, don't get a car with it fitted; get a plain old common-or-garden RWD, like a Falcodore.

It's RWD most of the time! AWD is only engaged under certain conditions, like cornering, or rear-wheel slip.

Frankly, if you don't like the idea of Nissan's AWD system, don't get a car with it fitted; get a plain old common-or-garden RWD, like a Falcodore.

sometimes its nice to STAY in rwd

I would put money on it being the attessa system. Nissan wouldn't R&D a new symeterical AWD system for the lower end of their market.

I scratch my head everytime someone asks how to disable the attessa system, I mean once you do - you really have a GTS with a heavy front end. One day I plan on owning my own GTR, and their is no way I would be changing the AWD system thats had millions of dollars spent in R&D on how it reacts to conditions, to adjust it to a backyarders idea of how it should perform.

Cheers

Sumo

Oh okay cause I was under the impression that the attesa system was electronically initiated, and I heard that you can just remove the fuse to disable the attesa system which sends all the power to the rear wheels, with no front wheel drive at all. Also you can just install a switch which enables you to turn of the attesa, I'm not really sure if this is true or what? but if so thats great.

Oh okay cause I was under the impression that the attesa system was electronically initiated, and I heard that you can just remove the fuse to disable the attesa system which sends all the power to the rear wheels, with no front wheel drive at all.
I'm pretty sure that only works with the R32s. If you do that on a 33 or 34, they go into "limp home" mode.
Also you can just install a switch which enables you to turn of the attesa, I'm not really sure if this is true or what? but if so thats great.
Which is why someone worked out that the switch by-passes the "limp home" function.
actually when u pull the fuse on the r32's it compltely kill the front wheels, but the r33 and r34 the clutch pack is tightened by a spring (or somethign along those lines). basicly they will still be in rwd mode when u pull the fuse.

I'm sorry I don't really undestand can you explain in dumbas language I don't know much about cars.

I'll put it simply for you as everyone else seems to be avoiding giving you an answer.

The R34 25GT FOUR does in fact use ATESSA. They are a great car and if you don't want something fast and like the idea of 4WD would be a great car.

Why bother disabiling the atessa? it's not like he's gonna drift it, and it ain't a crazy performance car so you should be fine.

If you want it to be RWD nissan also make model that is only RWD, therefore you will win either way.

Personally a 4 door auto with 4WD sounds like an awesome car to me.

  • 1 month later...

Hey Guys,

Sorry to dig up an old thread, but had some questions relating to the ENR34, Particualr the 2 Door, Manual, AWD version.

1. Is the drivetrain out of a r33GTR? or more similar to a stagea RSFour.

2. Would it be as simiple as drop in a rb26 and instant GTR?

Thanks

Mario

Hey Guys,

Sorry to dig up an old thread, but had some questions relating to the ENR34, Particualr the 2 Door, Manual, AWD version.

1. Is the drivetrain out of a r33GTR? or more similar to a stagea RSFour.

2. Would it be as simiple as drop in a rb26 and instant GTR?

Thanks

Mario

I have a 2 door, manual r34 gt-four (had it about 2months now) and not many people really know the facts about their set-up, and this is only what i have found after reading up but mostly just driving the car.

1. Yes it uses the same atessa system as the gtr (which is only the computer side of things)

2. No its not a gtr gearbox, its definately not the r34 gtr box cause thats 6 spd, and the gt-four just doesnt "feel" strong like a gtr box, i would say its more along the lines internally of a rb25de box (same as a rb20det) or maybe a rb25det with the obvious casing changes to attach a transfer box.

3. No you cannot pull a fuse and turn it into rwd, that ONLY works for the r32's. Like previously said the car will go into a limp mode. Driving around like this will damage the front diffs clutches. Apparently you can disconnect the front shafts and it will go to rwd but the amont of effort to do it, just by a gtst.

4. HKS torque splitters can be fitted to adjust how much power is distributed to the front and rear. There is NO way to turn all the power to the rear, even with maximum power set to the rear, there will still be about 5% of the power still being sent to the front diff, which means no sitting on the brakes doing a big trev skid.

Although, with about 95% of the power going to the rear, that should be enough to step out around corners.

5. At the stock power level, the car just feels safe to drive in the dry around any corner. I can boot first gear take a 90 degree bend while smashing second and the ass end will attempt to come out but then the front just grips and puts you straight ahead, the car will understeer before it oversteers into a corner.

The wet is another story, since it is mainly rwd it will go VERY sideways if pushed but its a very easily controlled sideways since you can always feel the front helping you stay in control. So pretty much what i'm saying is if you want to go "drifting" like intial D in this car wait till its wet, go to somewhere quite, and have all the fun then, otherwise get a gtst.

6. The rb26 can bolt straight up and id say that once that was done, even in the dry the awd system will be smoking all fours around corners. A more budjet friendly solution is to get a stegea neo rb25det, change the front diff over with the stock gtfour one and your have a 206kw motor in your car cheap. Another good reason to go the stegea motor is that you stock gtfour harness will bolt up and the r34 ecu is flashable so you can get it retuned without spending dollars on a new ecu or piggy back.

Im planning to put a stagea motor in my car, and the more i learn about the gt-four i will post up cause its a bit of a mystery...

Edited by R34GTFOUR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...