Jump to content
SAU Community

Recommended Posts

Myth or Fact?

Sediment collection from running fuel tank too low?

I think I've read about this subject before but here we go again. I came to the conclusion that it was a myth, as for Fuel is drawn from the bottom of the tank so having a low tank wouldn't make any difference to a full tank, BUT, I've just come across a quote from the Nissan website & now it's got me unsure again!

http://www.nissan.com.au/owningNissan/vehi...enance.asp#fuel

Also, avoid running the tank too close to 'Empty'. Petrol impurities and sediments collect at the bottom of your tank and can cause problems if drawn into the fuel line.

Can someone please clear this up & technically explain why it's myth or fact? If it wasn't for me reading that Nissan page I would have still thought it was a Myth.

:)

Link to comment
https://www.sau.com.au/forums/topic/149667-myth-or-fact/
Share on other sites

my theory is that when the tank is full, the sediment, or crud as i call it, is more diluted around the tank. but when the tank is low, the crud is more concentrated so its more likely to get drawn inot the line.

remember......i said 'theory' :)

Link to comment
https://www.sau.com.au/forums/topic/149667-myth-or-fact/#findComment-2790339
Share on other sites

Yep thats what it says in the manual. Also mechanics will tell you the same.

I'm looking for a little more than just “Nissan & Mechanics say so”, I like to know how things work so if somebody can technically explain why it's a fact that'd be great, thanks :)

Edited by geno8r
Link to comment
https://www.sau.com.au/forums/topic/149667-myth-or-fact/#findComment-2790343
Share on other sites

yeah bingo not good for your fuel pump especially i've had a few friends who run their tanks to the very last drop constantly and as such have had fuel pumps die early......

i do on occasion run it until the fuel light is on unintentionally but most of the time ensure the tank is as full as possible.......

think about it --- say you're drinking a drink using a straw, do you really like scrambling for the last drops from the bottom of the glass, or do you prefer drinking from a full glass? the fuel pump would feel the same about trying to feed your engine its fuel

Link to comment
https://www.sau.com.au/forums/topic/149667-myth-or-fact/#findComment-2790353
Share on other sites

yeah bingo not good for your fuel pump especially i've had a few friends who run their tanks to the very last drop constantly and as such have had fuel pumps die early......

i do on occasion run it until the fuel light is on unintentionally but most of the time ensure the tank is as full as possible.......

think about it --- say you're drinking a drink using a straw, do you really like scrambling for the last drops from the bottom of the glass, or do you prefer drinking from a full glass? the fuel pump would feel the same about trying to feed your engine its fuel

Makes sense, but not really a direct answer to my question, more a related answer *but thanks for the knowledge anyway :ninja:*.

Getting back to the actual sediment issue.

my theory is that when the tank is full, the sediment, or crud as i call it, is more diluted around the tank. but when the tank is low, the crud is more concentrated so its more likely to get drawn inot the line.

remember......i said 'theory' :)

Sure, but over time I guess it's all going to get sucked through the injectors anyway seeing fuel is drawn from the bottom right?

Link to comment
https://www.sau.com.au/forums/topic/149667-myth-or-fact/#findComment-2790392
Share on other sites

I'm looking for a little more than just “Nissan & Mechanics say so”, I like to know how things work so if somebody can technically explain why it's a fact that'd be great, thanks :)

Ok, your fuel pump runs hotter (less lubrication cos not much fuel there). Your fuel injectors will get clogged up with all the petrol tank gunk. Thats the two main worries.

Link to comment
https://www.sau.com.au/forums/topic/149667-myth-or-fact/#findComment-2790468
Share on other sites

In both my skylines that have been over 10 years old, the tank has been crystal clear whenever I've gone to change the fuel pump.

I think it's a bit of a myth in most cases, but that said, there ere are probably a few out there that have had dodgy fuel put into them in some Japanese country area or something, and hence crap gets in there. So the only real way is open up your tank, shove a torch in and have a look for yourself.

Link to comment
https://www.sau.com.au/forums/topic/149667-myth-or-fact/#findComment-2790750
Share on other sites

nissan might recommend not running a tank empty due to overheating in fuel pumps, less fuel pumps fail early less get replaced on warranty, i doubt its sedimentation and more the overheating fuel pump failing

my couple of cents eh

Link to comment
https://www.sau.com.au/forums/topic/149667-myth-or-fact/#findComment-2791412
Share on other sites

Your fuel injectors will get clogged up with all the petrol tank gunk. Thats the two main worries.

So why do you have a fuel filter in your engine bay? To sit there and look shiny... no, it filters the fuel before it gets anywhere near your injectors.

Link to comment
https://www.sau.com.au/forums/topic/149667-myth-or-fact/#findComment-2791690
Share on other sites

Do you realise that you can clog up your petrol filter way before the 15000 KMs intervals its meant to changed?

Obviously, its a filter so its gonna clog up, so change it before the 15000KMs interval if you think its gonna clog up sooner. Its still a filter that sits between your tank and your injectors...

Link to comment
https://www.sau.com.au/forums/topic/149667-myth-or-fact/#findComment-2792425
Share on other sites

Obviously, its a filter so its gonna clog up, so change it before the 15000KMs interval if you think its gonna clog up sooner. Its still a filter that sits between your tank and your injectors...
Yeah but with that approach your car's not gonna last very long. If you wonna run your petrol tank dry and change fuel pumps and fuel filters every 5 000 Kms then go for it :wave:
Link to comment
https://www.sau.com.au/forums/topic/149667-myth-or-fact/#findComment-2792443
Share on other sites

Just dont use a lighter =)

In both my skylines that have been over 10 years old, the tank has been crystal clear whenever I've gone to change the fuel pump.

I think it's a bit of a myth in most cases, but that said, there ere are probably a few out there that have had dodgy fuel put into them in some Japanese country area or something, and hence crap gets in there. So the only real way is open up your tank, shove a torch in and have a look for yourself.

Link to comment
https://www.sau.com.au/forums/topic/149667-myth-or-fact/#findComment-2792607
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...