Jump to content
SAU Community

Recommended Posts

The next Winton Fun Day is scheduled for Sunday January 28th 2007.

The Fun Day is a "come and try" day and is designed to allow the average motorist access to a real race track under controlled conditions.

Cost:

Is $25 per driver and $25 per passenger

Programme:

Normally be there by 8.00 for scrutineering, but this can take some time.

Drivers Briefing at around 9.00 - 9.30

Driver only on track for 30 minutes sighting laps, then

Driver with passenger for 30 minutes, then

Driver only on track for 30 minutes, then

Driver with passenger for 30 minutes, then

Driver only on track for 30 minutes, and so on all day until about 4.30

Requirements:

Bring your car, an Australian Standard Approved helmet, the helmet can be either open or closed face, fire proof clothes that cover you from neck to ankle to wrist (cotton or wool clothes are good). Runners are not the preferred footwear, Blundstones boots (or similar) or any leather type shoe is preferable

Make sure your car has no oil/coolant leaks, fitted seat belts, battery is secure, wheels nuts are tights, no loose items in the car or boot.

The Car does not have to be registered, but has to road/race worthy. Tyres need to be in good nick, tread depth is not normally a problem unless wire is poking out.

There are normally no checks done of lights except for brake lights except if it is an overcast, rainy day, then there may be checks for lights as well as wipers.

Tow bar tongues and bull bars must be removed.

You do not need to have a race licence, club licence or indeed a car licence abut you must be over 16 to drive or be a passenger.

And very importantly, bring a smart, alert attitude, coz there is some very fast cars out there, whilst it is not a race meeting, some people bring race cars and we push them hard to behave appropriately around first timers.

Food and drinks are available through a canteen.

Link to comment
https://www.sau.com.au/forums/topic/149944-winton-fun-day-a-come-and-try-day/
Share on other sites

I'm in Mt Beauty that weekend so I might stay on an extra night and have a go. I have a mate coming too. Can we share the driving in one car?

Russ

Yep, but you both need to pay and get a wrist band.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...