Jump to content
SAU Community

Recommended Posts

for sale:

93 rb20det motor package

approx 75,000kms

includes:

complete motor: sold

gearbox: sold

flywheel: sold

HD 5puck clutch: sold

inlet manifold and plenum: sold

injectors: sold

throttle body

6x new coil packs: sold

exhaust manifold and turbo and sheild: sold

3in dump/front pipe: $100

2.5in piping for front mount: sold

radiator: $100

power steering pump

alternator

air con compressor

starter motor

r32 crossmember and engine mounts

gearbox mount

tailshaft

lume

think thats all of it. it is pretty much a complete front cut minus the car chassis part

prefer to sell it all together but might consider seperating the gearbox from the complete motor from the mounts etc providing i get the right price for all items

#edit# sold the major parts so reasonable offers accepted on the remaining items

please reply to pm as i don't check the thread much (but give it a bump anyway)

located near (west of) brisbane (ipswich for the locals)

also for sale:::

*apexi twin chamber bov. $150

*z32 hubs/spindles. $100

*s2 rb25 turbo. guess you could say its blown. has a bit of shaft play and is a bit noisy/squeals. great for rebuild/hiflow. sold

*s14a complete rear cradle (includes cradle, lsd diff, halfshafts, all control arms etc, hubs/5stud spindles, swaybar, rotors, calipers, handbrake cables, etc. $500

*absolutely heaps of s13/180sx parts (just ask for what you want cos i've probably got it)

Edited by rb20inside
Link to comment
https://www.sau.com.au/forums/topic/150538-rb20-conversion-package/
Share on other sites

bov is atmo and needs an adapter. however, i also have a short piece of pipe with the appropriate flange on it though, which i can include.

motor gone, rest of the parts still available

Edited by rb20inside

no more clutch/flywheel

gearbox now gone also

crossmember/mounts and LOTS of minor bits now for sale individually

cheers lads

Edited by rb20inside
  • 2 weeks later...

how much for the manual driveshaft and do you still have the brake and clutch pedals and the hydraulic clutch lines.

needed for a manual conversion i heard you can retain the auto gearbox mount when doing the conversion

  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...