Jump to content
SAU Community

Recommended Posts

After a cheap stock radiator should have mentioned sorry.

No such things a "cheap" and imports :D

Have your tried any of the wreckers at all, there not the easiest thing to come by as when there smacked in the front there normally one of the first things damaged as you would know :kiss:

Link to comment
https://www.sau.com.au/forums/topic/150574-r32-radiator/#findComment-2803852
Share on other sites

Yeah theres a '32 at the wreckers up here but as you said radiator was one of the first things f**ked in it.. There's 52mm alloy ones on ebay at the moment for about $250 new that's been the best option so far.

Just be carefull with some of the ones off Ebay they are straight up NASTY!!!

Send Benno a PM and see what the damage on one of the custom ones are as they are the ducks guts and great build quality :kiss:

OR you can buy my stocker and i'll put a PWR one in :D

Link to comment
https://www.sau.com.au/forums/topic/150574-r32-radiator/#findComment-2803916
Share on other sites

Just Jap ally radiators are good, about $300 or so. I have seen two now, VERy good build quality.

The Cooling Pro ones Just Jap have are $399 + postage so if you were after an alloy rad you would be better off buying one of the ones from BMS

Link to comment
https://www.sau.com.au/forums/topic/150574-r32-radiator/#findComment-2805192
Share on other sites

Just Jap ally radiators are good, about $300 or so. I have seen two now, VERy good build quality.

I have a just jap one. good quality and my car runs alot cooler think it cost me 430 delivered.

If I knew Stu (BMS) sold them, I would of got one off him.

Link to comment
https://www.sau.com.au/forums/topic/150574-r32-radiator/#findComment-2805437
Share on other sites

BMS? who that?

BMS

I have a just jap one. good quality and my car runs alot cooler think it cost me 430 delivered.

If I knew Stu (BMS) sold them, I would of got one off him.

Dont get me wrong the Cooling Pro ones aren't bad for the price but i would rather support a local and i've seen a few "dodgy" AM alloy Ebay specials :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/150574-r32-radiator/#findComment-2805474
Share on other sites

wicked, i didn't know there was alocal tasy crew who sold all this gear.

Where is Beechys?

Based in Launie cobber.

There are a couple of Just Jap Reps here in Tassie:

BMS

Beechy's Service Centre

and im not 100% sure if he still is seeing as he is the head honcho at Octagon now but Perrywinkly is the Just Jap rep for Tassie :P

Link to comment
https://www.sau.com.au/forums/topic/150574-r32-radiator/#findComment-2808999
Share on other sites

BMS have a few R32 radiators and silcone radiator pipes in stock, including a very nice alloy one I'd bough for the GTR (Triple core, 40mm and fits the standard shroud) that I never got around to putting in... and seeing has I just bought an FD RX7 I doubt its needed anytime soon!

Brand spankers for $350 if anyone wants it.

Link to comment
https://www.sau.com.au/forums/topic/150574-r32-radiator/#findComment-2811045
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
    • Yes, well. Mine are less than half that. ARBs are not set to "dumb" either.
    • I would hope. But, we all know even the best companies have an issue sporadically.
×
×
  • Create New...