Jump to content
SAU Community

Recommended Posts

Hey guys,

Ive come across a completely stock R32 gts-t in victoria. It has been imported from japan but has not been complied. I am looking into transporting it over to SA and having it complied and regoed here.

So how much cash am I looking at? about 500 to get the car over here, 1200 for compliance?

What do you guys think. Id be eager to hear from ppl who have done this exercise before

thanks

Michael

Hey guys,

Ive come across a completely stock R32 gts-t in victoria. It has been imported from japan but has not been complied. I am looking into transporting it over to SA and having it complied and regoed here.

So how much cash am I looking at? about 500 to get the car over here, 1200 for compliance?

What do you guys think. Id be eager to hear from ppl who have done this exercise before

thanks

Michael

Transport to SA from VIC could cost anything from around $350 to $600 depending on how much space transport companies have available and how friendly they are to you.

Compliance will depend on how the car was imported - I would hope that it came into Australia under the '15 year old' laws before they ended in Dec 2005 because if so then you should be able to comply the car for around $1,000 or less. if it was imported under the SEVS compliance scheme then it must be complied by the workshop who issued the import approval.

In any case make sure you get the import approval and check the history of the car before buying.

Thanks Craig,

Yeah the car is a 15 year import. I think I will choose to get it complied and registered in vic, that way I can get the racv to do a pre purchase inspection done and I can test drive it before I take delivery. The seller is offering to comply the car through his contacts.

It would be a great help if you could give me a list of things to ask for, as far as import docs and car history go. You said that I should get the car's history, do you mean the details that were recorded on import? or history about the car's life in japan?

I will get an inspection done, have the report sent over to me and speak on the phone with the guy who inspected the car. Its a 1990 model and has apparently 98,000 kms. Is there anything specific I can ask the inspector to look for that will help me to verify the km? this is one thing I am nervous about. If the car has been stolen/rebirthed in japan I assume this will come up through compliance

Also I have noticed that it doesnt have 'nissan' and 'gts-t' on the back. has it been resprayed? is there another way I can check this?

Thanks

Edited by MichaelB
Thanks Craig,

Yeah the car is a 15 year import. I think I will choose to get it complied and registered in vic, that way I can get the racv to do a pre purchase inspection done and I can test drive it before I take delivery. The seller is offering to comply the car through his contacts.

It would be a great help if you could give me a list of things to ask for, as far as import docs and car history go. You said that I should get the car's history, do you mean the details that were recorded on import? or history about the car's life in japan?

I will get an inspection done, have the report sent over to me and speak on the phone with the guy who inspected the car. Its a 1990 model and has apparently 98,000 kms. Is there anything specific I can ask the inspector to look for that will help me to verify the km? this is one thing I am nervous about. If the car has been stolen/rebirthed in japan I assume this will come up through compliance

Also I have noticed that it doesnt have 'nissan' and 'gts-t' on the back. has it been resprayed? is there another way I can check this?

Thanks

I would make sure you can get the import approval paperwork to show that it was imported legally, and also ask for anything he might have from when it was purchased in Japan - paperwork from the exporter, auction report, shipping paperwork, etc.

Stolen cars are not able to get through Customs in Japan normally so I would not worry about that if the car is already here in Australia.

Don't put too much faith in RACV inspections as they have proven to be quite useless in the past - it's not a bad way to get a general idea but I would stronlg suggest that you look over the car properly yourself also.

The seller will not comply the car without my giving a deposit, hence basically commiting to buy it. So i am going to get it inspected, so I will head down to vic. and look at it and test drive it before it goes to compliance and rwc, rego. Once that is successfully done I pay the rest of the amount and get the car transported to adelaide.

the problem I have is that I will not see the car from the time before it goes to compliance to hwne it rocks up at my door, so I wont see any changes that have been made to the car during compliance and rwc. Is it likely that much of the car will have to be changed? I expect just tyres, windscreen, side intrusion bars. My question is, will anything be changed during compliance and rwc that I would want to see before paying for the car, or would the car essentially be the same before and after compliance

DON'T get the car complied in Vic - you are wasting your money, because the requirements for 15 year old cars for registration are different from state to state. Even if it was already registered in Vic, it would still have to have a pit inspection at Regency regardless.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello, just just bought an 1999 enr34 with a stock rb25neo and I'm looking to upgrade the engine to 500whp I know some basic things but wondering if there are things I'll need to do to upgrade the stock block and all the bits and pieces to achieve this.
    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
    • I see you missed the rest of the conversation where they have benefits, but nothing to do with avoiding breaking turbos, which is what the aftermarket BOV made all the fan boys, tuners, and modders believe was the only purpose for them...
×
×
  • Create New...