Jump to content
SAU Community

Recommended Posts

bendix ultimates are renowned for squeeling. There can be many causes of squeeling, so you'll have to check all this out.

Cause one, oscilation of the shim - bit of anti squeel goo will fix this.

cause 2 - Glazed pads - if not broken in properly, or any number of other causes. remedy is chamfeuring the pads. i.e. sand paper off the glaze.

cause 3 - missing anti squeel shim behind

another thing that seems to work well with the ultimates, is to sand the edges, so it's a bit rounded.

Everyone always winges about the ultimates squeeling, but i've managed to make them go alright. hell dusty still though.

my ultimates squeel quiet abit but only under light braking, ive read its also due to the dust that the pads create, not sure though.

would glazed pads squeel? i would have thought that it would make a different sound?

i mite have a look at seeing if the pads are glazed aswell.

Some people are lucky some aren't.

I couldnt get mine to stop sqealing.

I tried cleaning the discs, cleaning the calipers, putting shims in, putting anti-squeel goo on the shims, slightly sanding the edges of the pads

Couldnt get them to stop squealing.

So i got Rb74's, bedded them in properly, used shims with paste, and no squeel what so ever

I have project Mus on the front, and on a cold day (first start up for the car) while reversing they squeel for a bit.. A little loud if i brake hard..

but this only happens while reversing on a cold day..

im just assumming the pads are more suited for the heat.. So this could just apply for you also..

However i did use nulon brake cleaner and it has worked a little.. But you can still hear little squeels.. Not as bad as before tho.

So give that a try.. Only 12 bucks for the bottle i think..

i just purchased these pads aswel.. as i have never had new pads in a car whats the correct way to bed them in??? some hard acceleration and then hard breaking etc

Thanks all for replies. Ill try some brake goo/cleaner.

When you bed them in, dont brake hard for the first few KMs at least. Go easy on the brakes, then gradually give it some more. Theres a guide on here, dafs.

isnt it nice.. while i do that? i have a skylinesaustralia sticker on my rear window? i like to have fun... others are being hypocrites because they've all done the same thing... i don't care really.. i enjoyed it, it made me happy.. and entertained others.. so who cares what you have to think..
Thanks all for replies. Ill try some brake goo/cleaner.

When you bed them in, dont brake hard for the first few KMs at least. Go easy on the brakes, then gradually give it some more. Theres a guide on here, dafs.

cheers mate thanks

What's the attraction to Ultimate's anyway???

They eat rotors, they're noisy, they're damn expensive, and they don't perform anywhere near as good as far cheaper Lucas...

Just because Bendix have the name when it comes to supplying OEM products, doesn't mean they know how to produce a performance pad! :cool:

acutally ultamite are quite good with some temp in them.

this i what u get with semi/race pads. u dont get the low temp (cold) feel as u would with stock. onl advantage is when u warm them up enough, this is good for track days when u dont want brake fade to come in when u just got use to the track.

ferodos are only $40 i relise they are just slightly better than the stock pads, dont waste money on brand name stuff, got for what u need. would be such a waste of money if u dont attend track days etc.

ps all race/peformace pads WILL chew up ur rotors, so dont go spending money on somthing u dont need.

i use to have ultimates on my civic. i love em. never fadded even when i drove hard on twisty roads for a long time. they also have very good pedal feel. they only bad thing about them is they are very dusty (but most performance pads are). i now have endless ssy pads on my R34. if u think the ultimates are loud u should hear these when they are cold. they can wake up the dead. i sometimes feel like someone is grinding my teeth away when they sqeek. but i think next time ill go for the ultimates again as they are half the price of the endless pads and i think are just as good...

What's the attraction to Ultimate's anyway???

They eat rotors, they're noisy, they're damn expensive, and they don't perform anywhere near as good as far cheaper Lucas...

Just because Bendix have the name when it comes to supplying OEM products, doesn't mean they know how to produce a performance pad! :D

I beg to differ - I had Lucas pads in my GTR and they were the most pathetic pads I have ever used.

What's the attraction to Ultimate's anyway???

They eat rotors . . . .

I couldn't disagree more, we had a set on the front of our ute for 18 months that only does track work, no road going, so bloody hard braking. I checked the rotors with a micrometer before fitting the Ultimates and the rotors were 23mm, when we took them coz we scrapped the ute the rotors were 22mm. 1mm in 18 months on a race track!!! Edited by Big Trev

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • That's my life. Past-Duncan has a lot to answer for
×
×
  • Create New...