Jump to content
SAU Community

Recommended Posts

ok i got a 2 1/2" zorst from engine

had an epa test yesterday and with standared muffler i got 88db out of the leagal 90db

now with the big bore attached (without resinator which is gonna be added tomorrow) i dunno what it would be, but try setting off 12 car alarms just by driving past at 20km/h or less, its one loud mf!

basically if u have a standared muffler but a big ass pipe like 2 1/2" it will be almost illegal, dunno how it would be for a 3" but im guessing it would go over

chuck a big bore and see what happens hahaha, sounds mad in the cabbin to, shakes everything

Link to comment
https://www.sau.com.au/forums/topic/1511-exhuast-noise/#findComment-29647
Share on other sites

I have a big ass 'zorst - 3 1/4 off the tubo, 4" high flow cat and 3 1/2 cat back... its stinkin' loud, over the limit for sure and sets off alarms all the time at any rev range..

if i get busted by the epa, i'll take it off - maybe even consider selling the car, its too difficult to own a nice modded car these days.

Link to comment
https://www.sau.com.au/forums/topic/1511-exhuast-noise/#findComment-29824
Share on other sites

i just got my big bore refitted with a hotdog resinator

but it didnt make all that much difference, it idles the same, its slightly a bit lower but nothing u can tell

the dude gave it to me for free coz it didnt work hahaha he is cool,

Link to comment
https://www.sau.com.au/forums/topic/1511-exhuast-noise/#findComment-30300
Share on other sites

Originally posted by ONARUN

LOL

as if you would. you'd turn gay before you sell it and don't tell me otherwise cause i aint listening:talk2hand

shut up - i was just expressing my anger towards the way that the rta and the police treat us...

:talk2hand:

Link to comment
https://www.sau.com.au/forums/topic/1511-exhuast-noise/#findComment-30422
Share on other sites

Hmm, that's one thing im worried about when i get my car. Noise defects = 2 point penalty

P platers only get 6 points.. i don't want to lose my liscense from defects!

I'm going with 3" right through, and an apexi N1 muffler (or look-a-like) what's the go with those silencer things? i hear they are bad for your car, and i read somewhere they cause pinging (wtf?? is that possible?!)

Link to comment
https://www.sau.com.au/forums/topic/1511-exhuast-noise/#findComment-30680
Share on other sites

I was thinking of making up a flap that sits inside the cat (the cat convetor minus its innards) which could be cable operated. If you need you car to be quiter, pull the cable, which will pull the flap down in the cat ,effectivly bouncing the sound waves back to the engine. haven't made one yet, but have seen one on a GTR with a full3.5 inch exhaust with no resonators and a straight through muffler and it made it REALLY quiet. Keep everyone posted

Chris

Link to comment
https://www.sau.com.au/forums/topic/1511-exhuast-noise/#findComment-31030
Share on other sites

Guest Boxhead

firstly, we all know that n/a are louder then turbo powered....

im n/a...

secondly, im in sydney atm.. and well we went through burwood westfeild car park, and set off about 8 alarms in the space of about 5minutes.. most of that time was finding cars worth putting alarms on...

over 2 days my car has set off 16 alarms, half in westfeild, the others along the streets of sydney..

my back muffler is actually a twin hot dog style.. and its loud.. i hope i dont get done..the guys at the exhuast joint said it should quiten down a bit after its been used a little tho.. coz they put on a 2 1/2 cat back...

i was also told by a guy who knows cars.. that if you take out the cat convertor, and put in another muffler, it will sound much bette,r give better performance and also better fuel economy.. looks like i might do that soon.. hahaha and none of you loody tree huggin hippies better try and stop me.

by the way if any of you guys see a gunmetal grey skyline nsw plate xxx-662, thats me.. ill be around summer hill, burwood, etc etc...

Link to comment
https://www.sau.com.au/forums/topic/1511-exhuast-noise/#findComment-31429
Share on other sites

i was also told by a guy who knows cars.. that if you take out the cat convertor, and put in another muffler, it will sound much bette,r give better performance and also better fuel economy.. looks like i might do that soon..

Not only is it illegal, but you could be up for thousands of dollars in emission fines. Why? something called polution. Polution laws came in the early 80's, and all cars after a certain date required a cataylic converter by law. If you want better performance, get a turbo.

Link to comment
https://www.sau.com.au/forums/topic/1511-exhuast-noise/#findComment-31449
Share on other sites

Guest Boxhead

its because of tree huggin hippes we need to have them, pffft i wont live long enough to see the difference, therefor its not my problem, and anyway by the time it makes a differece, they will have things to fix the problem without a cat convertor... ohwell.. we will see what happens, by the way, the alarm count so far is up to 31...

Link to comment
https://www.sau.com.au/forums/topic/1511-exhuast-noise/#findComment-32771
Share on other sites

yo.

I wasn;t running a cat for a while... i have a big ass exhaust.

I got a 4" high flow put in and it has just quietened it - no performance loss at all. its not worth it for the risc of a hefty fine and destroying the environment.

Link to comment
https://www.sau.com.au/forums/topic/1511-exhuast-noise/#findComment-32773
Share on other sites

Originally posted by Chris32

I was thinking of making up a flap that sits inside the cat (the cat convetor minus its innards) which could be cable operated. If you need you car to be quiter, pull the cable, which will pull the flap down in the cat ,effectivly bouncing the sound waves back to the engine. haven't made one yet, but have seen one on a GTR with a full3.5 inch exhaust with no resonators and a straight through muffler and it made it REALLY quiet. Keep everyone posted

Chris

http://www.autospeed.com/A_0883/page1.html

has an article on an exhaust noise control system.

Link to comment
https://www.sau.com.au/forums/topic/1511-exhuast-noise/#findComment-32797
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you have the original log book and it didn't have a chassis number quoted, then no money required.  I have "rechassied" a number of race cars, no problem as long as you have the original log book.   Cheers Gary
    • Well the good news is that it won't run any worse with an atmo bov than it does with no bov, I've owned a few Nissans over the years (r32, s15 and now r33), the stalling issue caused by a bov or no bov while still having an afm is easy enough to live with, most people get used to driving them and just feathering the throttle when you come to a stop to avoid it stalling. Changing to a proper ecu with a map sensor is ideal but in the short term I'd just slap in the bov if you really want the whoosh sound. I looked into the pass through type maf like the R35 one above but decided against it as the amount of oil and crap flowing through the hot side would mean you'd have to clean it often to keep it working.
    • Build an 800hp motor. Make it as bullet proof as you want, you WILL still break things. Like, the rest of the car. Heck, even as a dead stock car, things will still break, but the more power, the more everything else will let go easier. From gearbox gear sets, to extra stress on the chassis/mounts, more stress on diff, axles, tailshaft, even the suspension mounts. Check out the motorsport build that last year went to a Bosch motor sport ABS setup, and now can brake so damn hard it's twisting mounts for suspension/subframe etc. Now if the brakes can do it, imagine what happens with super grippy tyres and 800hp in a low gear...   Shit, I'm presently out fixing the girlfriends daily driver that rarely sees past 3,000rpm and is used to cart the dogs around in. Everything WILL break. If you don't want it to break, don't drive it. And then laugh, as it will still break without even being driven!
    • ECUMaster is an Australian company from memory, been around a while, and seem to actually play really well on more unique engine setups. Seems to be more of them being used in the states, and they seem to support more cylinders than most others.   My opinion on stock ECU/Nistune with he AFM, is you can tune around the issue of stalling. It's still a bit of a band-aid, and not the most perfect smoothest setup, but it can make it drive able and not an absolute PITA. But you're still compromising. A vent to atmosphere BOV has the same issue as no BOV with regards to the AFM. Both make the ECU think more air is entering the engine than there really is. And I can't find any hard science/decent evidence that supports the claims all the "you MUST run a BOV of some sort of you'll blow the turbo up". About the only one some people can give of why is "lag between gear shifts", and that is only an issue when your boost source for the waste gate is pre throttle body. I ran my boost source for the TD07S off the inlet manifold. Didn't have weird boost spiking issues, didn't have boost control issues, and on a gear shift the wastegate slammed shut, which meant all exhaust gases would be keeping it going round and round and not waiting for the wastegate to shut again when I stepped off the clutch and back on the loud pedal. It came back on boost in the next gear pretty much instantly.   ECU / tune / BOV choice I think really comes down to a lot more factors than just what you've stated. And personally, especially for daily driving, recirc setup for the BOV, or no BOV. I dislike the really loud BOV when everyone is taking off from the lights etc.
  • Create New...