Jump to content
SAU Community

Recommended Posts

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Yup.

I have 2 buckets in 2 corners of my shower - when full, these water my tomato plants.

When doing the dishes, I collect the water while im waiting for the hot stuff in a jug and that waters the roses.

I dont leave the tap running while I brush my teeth.

If you dont have one, install a toilet with a dual flush system - and always use the 1/2 flush (unless you need to use the big flush).

Also have a connector thingy and a long hose, so that when the washing machine drains it goes out onto the garden, instead of down the drain.

Quick showers.

Wash with a full load - be it clothes, dishes, etc - dont waste water on just 1/2 a load.

I see little point to be honest.

When household water useage only accounts for a very small percentage of overall water use, and even smaller propotion is wasted water, its just a typical case of the Gov't looking as if they are "doing" something.

The real water wasting comes from Commerce & Industry ectors at a much higher waste and useage rate than the common household.

If you do some reasearch into the wasteage going on up in the irrigation areas up near the murray, BILLIONS of litres are lost each year because the Gov't does not deem it "cost effective" to pipe the open channels.

Now... IMO, cost should not matter at all, because once a dam is dry, its dry. Then the REAL cost will be felt

The Gov't quotes figures of around 700-1000ltrs a day for a household use.

With two people in this house, we wouldnt even come half way close to that. Fair enough a house with 2 Adults and 2 kids would... but two blokes, no chance.

nobody's gonna stop my 20 minute showers... you hear me... NOBODY!!

PS errr... why go nude just to piss in your backyard? surely just unzipping is enough

I cbf getting dressed for a morning wee... the grass is hating it though, those yellow patches are slowly taking over...

I see little point to be honest.

When household water useage only accounts for a very small percentage of overall water use, and even less of that propotion is wated water, its just a typical case of the Gov't looking as if they are "doing" something.

The real water wasting comes from Commerce & Industry sections at a much higher wasteage rate and useage rate than the common household.

If you do some reasearch into the wasteage going on up in the irrigation areas up near the murray, BILLIONS of litres are lost each year because the Gov't does not deem it "cost effective" to pipe the open channels.

Now... IMO, cost should not matter at all, because once a dam is dry, its dry. Then the REAL cost will be felt

The Gov't quotes figures of around 700-1000ltrs a day for a household use.

With two people in this house, we wouldnt even come half way close to that. Fair enough a house with 2 Adults and 2 kids would... but two blokes, no chance.

Very true. Commerical water saving is where its at!

BTW wtf is John Howard thinking of using Nuclear Power?? Does he know how many thousands of litres of water a day the nuclear reactors need for cooling????????? In Europe and America yes, they have plenty of water, but not in Australia... at least not the south part.

nobody's gonna stop my 20 minute showers... you hear me... NOBODY!!

PS errr... why go nude just to piss in your backyard? surely just unzipping is enough

right on!

never been in the shower for any less than 20mins. i once stayed in there for 45mins :O but it was a very cold night with very hot water on :P

Edited by R-SPEC
I see little point to be honest.

When household water useage only accounts for a very small percentage of overall water use, and even smaller propotion is wasted water, its just a typical case of the Gov't looking as if they are "doing" something.

The real water wasting comes from Commerce & Industry ectors at a much higher waste and useage rate than the common household.

If you do some reasearch into the wasteage going on up in the irrigation areas up near the murray, BILLIONS of litres are lost each year because the Gov't does not deem it "cost effective" to pipe the open channels.

Now... IMO, cost should not matter at all, because once a dam is dry, its dry. Then the REAL cost will be felt

The Gov't quotes figures of around 700-1000ltrs a day for a household use.

With two people in this house, we wouldnt even come half way close to that. Fair enough a house with 2 Adults and 2 kids would... but two blokes, no chance.

also when i worked on the council,if there was a major leak somewhere we would turn on fire hidgrents<spelling<and leave them over night or even more.was a massive waste of water...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...