Jump to content
SAU Community

Recommended Posts

Hi guys,

Im after a new blow off valve. Have no idea what to go for. Right now i have the stocker in there with basic mods such as turbo back exhaust, pod, fmic, boost @ 12psi. I've finally reached the point where i want a blow off that sounds a bit deeper, a bit tighter. More of a tttsshhhh, instead of a ppsshhhh... if you follow me. :D A more solid and tight release sound, nothing too crazy though.

Is changing blow off valve allowed? And can it be engineered? I'll be getting my car engineered in the near future.

If someone could comment on whats available out there and what the differences are that would be awesome. Any recommendations would be good too. Thanks!!

Link to comment
https://www.sau.com.au/forums/topic/152291-blow-off-valves/
Share on other sites

1. dont be a wank...stick with plumb back...good for performance and doesnt mess with airflow...issues with idle and hunting and so forth.

2. atmo bovs arnt liked by tpt cops and you can and will get fined for it.

3. if your going to buy an a/m one get an ex stock gtr bov or a/m plumb back. Trust me when i say after 6 months to a year you wont want it anymore and will want to revert back to something less annoying and less wankish.

4. R31Nismoid will prob close the thread or another mod...with a comment similar to this. Learn to use the search button :D

Wasnt intending to be rude either.

Link to comment
https://www.sau.com.au/forums/topic/152291-blow-off-valves/#findComment-2833402
Share on other sites

Starting off your answer with dont be a wank and then saying you Wernt intending to be rude doesnt really come across that way.

He was asking about the legalities is it alowed and can he get it engineered ... sure he could have probably come across alot of info searching but in know way has he come across a wanker.

xizor atmo bov's are illegal you can and most likely will get defected if you get one. I wouldnt recommend it mate. Stick with the standard one... sure it isnt all that loud but atleast you dont have to worry when the boys in blue ask to have a look under ya boonet :D

1. dont be a wank...stick with plumb back...good for performance and doesnt mess with airflow...issues with idle and hunting and so forth.

2. atmo bovs arnt liked by tpt cops and you can and will get fined for it.

3. if your going to buy an a/m one get an ex stock gtr bov or a/m plumb back. Trust me when i say after 6 months to a year you wont want it anymore and will want to revert back to something less annoying and less wankish.

4. R31Nismoid will prob close the thread or another mod...with a comment similar to this. Learn to use the search button :)

Wasnt intending to be rude either.

Edited by fEkuaR
Link to comment
https://www.sau.com.au/forums/topic/152291-blow-off-valves/#findComment-2833446
Share on other sites

Yes i've been defetced for bov in the past. In no way will you get it 'properly' engineered. Though that's not to say you couldn't with the right people haha. A plumb back is a different story though as it keeps everyone happy, but you won't get your 'psssssh' noise. Up to you really...

Link to comment
https://www.sau.com.au/forums/topic/152291-blow-off-valves/#findComment-2833462
Share on other sites

yes i know...things come across the wrong on the net...everytime. When your saying things in a loose context or in a slangish lazy manner people take it the wrong way. Hence why i said at the end i wasnt intending to be rude.....maybe i just like to use the word wank?

Link to comment
https://www.sau.com.au/forums/topic/152291-blow-off-valves/#findComment-2833484
Share on other sites

Im sorry, why wont i get the blow off noise with a plumb back? I was of the understanding the stock one is a type of plumb back, and it does its soft woosh courtesy of me having a pod filter.

As i said im not crazy or interested in anything thats a big no no, so definitely not interested in atmo's. I did do a search and it seemed to just come up with loads for sale. Which doesnt really help me because i dont understand the differences in brands or specs to know what suits what im after.

I guess im looking for information on what else is out there that functions the same as the stock, but better for a modded car running higher boost, and doesnt sound quite as soft? I want the sounded to suite, so a bit more manly. :D

Link to comment
https://www.sau.com.au/forums/topic/152291-blow-off-valves/#findComment-2833491
Share on other sites

youve basically answered it in your own words....plumb backs dont make noise cause the air is sent back to the turbos intake. Only the feint whoosh from the pod filter as you said already. Anyother plumb back or similar bov will only make the same noise. Only way to get any noise or anything louder then std bov is an atmo one...but it will probably be over the top for what your thinking of.

I have a hks ssq at the moment...but its shitting me...so im going to machine up an adapter to suit so i can plumb it back into intake, like a std setup.

When it comes to bovs there isnt exactly a great deal in it...theres atmo, plumb backs and then 50/50 atmo/plumbacks in one!

Link to comment
https://www.sau.com.au/forums/topic/152291-blow-off-valves/#findComment-2833533
Share on other sites

hmm maybe...ive never noticed anything different about them...maybe their intake was an ally pipe, maybe a steel pipe, maybe plastic downpipe...maybe someones was a 2.5" pipe or a 4" pipe or something in between...all those things could affect the sound...probably even the type of pod filter you have and how long the inlet tract is. Anyway its upto you, atleast theres a little bit more info in here...might help to think it over with whats available.

If you wanna know about brands and types...all you need to do is buy a few car mags....HPI, ZOOM, HOT 4's and the other usuals...there is always different bovs for sale there all with pics and descriptions and prices. Will definetely help with the pick.

Edited by r33_racer
Link to comment
https://www.sau.com.au/forums/topic/152291-blow-off-valves/#findComment-2833578
Share on other sites

A Single GTR bov is a direct bolt on replacement for an RB25, it does have a tighter, more refined sound that actually has a note to it rather than just air moving that my RB25 one had. I plan to plumb mine back, but the microtech probably wont like that so I'm waiting for when i next need a tune.

Link to comment
https://www.sau.com.au/forums/topic/152291-blow-off-valves/#findComment-2833777
Share on other sites

hey guys i have an rb20, standard bov, but with a k&n pod filter. i swear to god the pod lets out a sound as loud and nice as most bovs i have heard. a mate of mine with an sr20 bought the same pod for his car and it started makin a similar noise. i really think it depends on the type of pod you have!

dont bother with the atmo, it aint worth the defect....my 2c

Link to comment
https://www.sau.com.au/forums/topic/152291-blow-off-valves/#findComment-2836078
Share on other sites

i have the ssqv too.....nice sound, if your into that sorta thing, and deals with any idoling problems common with the 33 after fitting an external wastegate

sorry mate can you explain that last part?? im actually looking at getting this bov now... either this or a greddy plumb back? is the ssqv plumb back??

Link to comment
https://www.sau.com.au/forums/topic/152291-blow-off-valves/#findComment-2837204
Share on other sites

keep he stocko on, and put a deceptor pro in the front drivers side intercooler piping, down in the wheel well. that way you can turn it on and pssssht away and off and the noise is gone. i have a blanking plate for the stock bov, or you could leave it stock if you can set the deceptor spring low enough i guess

instead of having the a/m one switch to plumb-back or atmo, totally block the polumback one and you will have no issues. if you want flutters, just put a blanking plate on the stocker your pod will do the rest.

changing pods will change your stock bov noise dramatically

Link to comment
https://www.sau.com.au/forums/topic/152291-blow-off-valves/#findComment-2837213
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...