Jump to content
SAU Community

Recommended Posts

Of course beemers will keep their value cos too many wankers want them.

If no-one wanted them then there value would decrease.

In the early 90's every yuppie wanted a 3 series bmw and thats why the value is still high. Compare the second hand prices of a 3 series bmw to a 5, or 7 series and tell me what you see.

  • Replies 144
  • Created
  • Last Reply

Top Posters In This Topic

i bet u the bmw's, and merc's will keep their value much better than a commodore. Plus they wont break down that often. Its not that hard to make a fast car, but to make it last is a different story

Expensive Euro cars actually hold their value quite poorly and have a high rate of depreciation.

And BMWs/Mercs having a good reliability record is also false.

U-G-L-Y it don't need no alibi it's ugly...damn ugly

Looks very Korean to me...like an enormous Daewoo thats taken a lickin with the ugly stick.. at best its a viva or vectra on roids. The design team just didn't know when to stop glueing unessesary crap on that clay model did they?. Those pumped out guards should only be on the sports versions...they look rediculous on an exec with stock rims/ride height ect. Or maybe the design team got bored and let their kids pimp daddies ride. Very ugly by design & sadly average from an engineering perspective. I wish GMH would try and build something fresh and new instead of just stretching out Opels and whacking on an extra bit here or there where needed. Same old same old from GMH... congratulations you've built a billion dollar rwd Daewoo....excellent.

i bet u the bmw's....wont break down that often.

well our series 5 bmw was satan incarnate (no pun intended). it "did things" of its own accord and needed frequent servicing. one time it wouldn't close the sunroof - another it wouldn't let us out of second, heh heh. yep, won't be in a hurry to get another beemer.

Edited by sigsputnik
Ahh the VE is a clean sheet design.

Yes and the world is flat...coz someone from the GMH publicity department says it's so.

Have a look @ the car and tell me they haven't followed the proven Holden formula of taking all the parts available from GM global modify as needed then stuff it into a body thats also stolen its form this time from the european opel of about 5 yrs ago. It's a hotchpotch caserole of commodore crap!!!

U-G-L-Y it don't need no alibi!!! it's ugly...damn ugly.

BMW's won't break down that often. :glare:

lol

The father inlaw owns one and has spent a packet keeping it up and running. (cracked heads, failed idle control etc)

BMW's are nothing more than a European Commodore.

Merc, they are much better.

god forbid you damage the engine in any way

Sounds like the perfect opportunity for an SR / RB conversion :glare:

I'd love an SR20DET powered E30 3 series, or an RB powered E34 5 series (although in the latter I'd probably go a 1U-ZFE and keep V8 power.

Expensive Euro cars actually hold their value quite poorly and have a high rate of depreciation.

And BMWs/Mercs having a good reliability record is also false.

Very true.

If you want proof take a look at 7 series BMW's. Take a look at their new price, and their price now, 4 years down the track... ouch

i suspect the effect we are seeing here has less to do with the car and its mechanicals, and more to do with the value of leasing high ticket cars. A three to four year rollover with 100,000ks is the sweet spot for higher five figure salaries.

Id prefer the previous model Magna (the awd version) over the new Commodore, any day of the week. But then again, if (IF!!) I ever go back to the mundane Aussie 6/8 banger, I'd go for a 2ndhand BA XR6 Turbo thank you very much. VE Commodore = cat spew

Yes and the world is flat...coz someone from the GMH publicity department says it's so.

Have a look @ the car and tell me they haven't followed the proven Holden formula of taking all the parts available from GM global modify as needed then stuff it into a body thats also stolen its form this time from the european opel of about 5 yrs ago. It's a hotchpotch caserole of commodore crap!!!

Ummmmm any other car currently share the same suspension, chassis, and many other components? Apart from the engine this commodore shares nothing with other GM cars.

Today’s Holden is nothing like Nissan which shares every components among its cheapest cars to its most expensive ones. Heck the new GTR has the same shape as the old 350Z and also the old Hyundai Tiburon.

Take off your Holden hate goggles.

Heck the new GTR has the same shape as the old 350Z

What's the shape got to do with it? The new Commodore looks like an Astra. But I know its, for the first time, all new and custom to holden rather than an Opel hand-me-down.

the ve is just like any other commodore a bucket of shit

wait till u see what goes on behind closed doors the ve/wm has more problems than u can poke a stick at

at least the ve comes with a custom paddleing pool in the passangers footwell

they should give away a free rubber duck with every ve/wm sold to keep the passanger amused (as the a/c drain tube doesnt seal propley and leak water on the floor)

and when that problem is fixed then the hvac module are prone to failing so u will never use the a/c system propley

creaks from the a-piller from bad spot welds

the alarm system is a joke (better off buying a super cheap system)

it takes about 2 seconds to remove the led indicators from the front guards (and u wont break it and u dont need any tools to remove it)

the list goes on ??????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...