Jump to content
SAU Community

Recommended Posts

Hi guys,

RB26, JB clutch and stock flywheel

- Car has firm (but not overly hard) suspension

- Bit of a resonance issue at cruising speeds (from exhaust)

- Shifter will pop out of gear after about 5 min on the highway, or bit earlier if the road is a bit rough

What should I start looking at to fix?

Cheers...

Link to comment
https://www.sau.com.au/forums/topic/152427-shifter-popping-out-of-gear/
Share on other sites

  • 2 years later...
If it happens when you back off more than likely you have a worn gear ( the one that pops out)

mine pops out of the tops gears, i have removed the gearboot and it helped for a while, but it still does it does that means the gears are destroyed? it maybe the 300rwkw goin through it though lol....

Yer you'll be looking at replacing the synchro hub assembly mate...won't know for sure until you pull apart the box but those are the symptoms that usually go with it. In a way it's good because there's no bullshit bandaid solution like using a different grade oil to silence problems, forcing you to repair it properly hehe :D

Bout $1000 to recondition it mate, plus the labour of pulling the gearbox out / installing it again. Oops, I just realised you aren't the OP that I originally addressed my questions to lol. Same problem anyway...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seems to be the case mate , still an OK price for a grey import.
    • I’m interested in the carbon diffuser fins and Toshiba MFD screen replacement if they’re still available.
    • @GTSBoy yeah i know it was not the "great" idea but it is and option...but i think i will stay on no BoV rather then trying to make it work with "half" this and that. But that GReddy FV2 is cool...i like that you can make it like stock if you want (and have/make the custom pipes) For other thanks! it was alot of information. But for the sound...a dont rly "like" both of them...specialy if they are loud...but if i "must" choose i would rather have little whooosh rather than sutututu with no BoV....BUT that is what is i gonna get. So for the all info i gather. In my case:  No BoV is not that bad cuz it is stock...and iam used to put N/clutch right after rpms are around 1000 so it should be ok...just need to avoid "big" drops. But i do not have the engine in the car so i do not really know how "bad" or good it is. But as i had that little test drive it looked ok. The atmo BoV should be worse car would dump to much fuel specialy between the shifts...so without proper tune/ECU i dont want that. BUT with that...car should drive ok with no problems right? (i do like there is less piping wih this solution) 🙂 
    • Usually an RB20 won't stay in closed loop idle anyway. The O2 sensor gets too cold, stops swinging.
    • They aren't, but it depends on what interests you about an R32-R34. If it's the front engine I6 turbo that tunes well with a manual transmission an E92 335i 6MT is so incredibly cheap. You can get a super clean one for 20-25k USD tops. Put an LSD in it, tune it, have fun with it. If it's the general idea of AWD + turbo and a manual transmission the 996 Turbo is absolutely much more expensive, it's less practical but it's also basically a complete track-ready car from the factory. At least the Mezger doesn't have heaps of oil control issues. And in the US the 996 Turbo and R33 GTR are roughly the same price these days. 996 maybe a bit more now that the hype has abated for old Skylines here.
×
×
  • Create New...