Jump to content
SAU Community

Recommended Posts

whats a TD06 worth? sounds awsome. I also have heard of a TD05/6, anyone else heard of this? apparently good upgrade for RB25 and has very quick spool up with good top end, although full boost by 3grand from the 06!! damn isnt that as good as standard?

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

Hi JMS is that you car on the Tilbrooks dyno graph on the "Which Trust Setup?" post?

If it is can you please have a look at the following table and let me know if it is close to what you have experienced...

At 7,000 rpm it has 300 rwkw

At 6,000 rpm it has 250 rwkw

At 5,000 rpm it has 195 rwkw

At 4,000 rpm it has 93 rwkw

That's an average of 210 rwkw.

To work this out I assumed on the dyno it was in 4th gear and running 27 kph per 1,000 rpm. I had to do this extrapolation because the graph did not show rpm.

I would appreciate your comments.

Actually got to drive the JMS 302rwkw GTST last night (thankyou Terry). I must say I was quite impressed. That car doesn't have the usual huge jap turbo sledge hammer effect at all ,but, was quite progressive power delivery. Very drivable even through tight cornering- no opps I boosted at the wrong time and did a 360! The turbo lag was noticable and took a slight change in driving style. Instead of just planting your foot for instant boost I had to change down a gear and use the revs. A familiar woooosh comes from anything over 3000rpm and a shove in the seat really takes effect after 3700rpm. The cars redline is set to 8000rpm which still provides ample rev range to play with. Would be lieing if I said I wasn`t grinning from ear to ear inside ( couldn`t let on to much that I`ve never driven a car with that much power b4 and Terry said he is a girl in the passinger seat) when I was frying the tyres all the way through second and third!- not enough road for fourth.

sidewaymambo- definately no instant throttle response if thats what your getting at. Extremely good compared to other cars "I`ve" driven with hiflo and big Jap turbos

Sydneykid- You seem to know better, how about you tell us what its like since you have never even seen the car. ciao

Guest Sir Bean
Originally posted by macka

TT anything that spools under 3K isnt going to produce alot of horsepower mate

This simply isn't ture. New generation turbochargers using variable turbine geometry and variable pitch turbines work to eliminate lag. They are more responsive and create higher boost pressures at lower engine speeds than conventional tubochargers by altering the internal geometry of the turbine housing. The boost pressure is optimized across the engine speed range by adjusting the guide vanes inside the turbine housing. At lower engine speeds, they restrict the flow and thus boost pressure is increased; at high engine speeds they open wide and the exhaust back-pressure falls, restoring top-end power.

These things would be simply awesome on the side of an RB.

I hope that brings people up to speed. No pun intended.

Originally posted by Sydneykid

Hi BOOSTD, did I read this right.....

"I was lookin a getting a trust TD06. Terry from JMS just installed one onto his Rb25 powered 32 and made 308rwkw @1.2bar and full boost a 3000rpm."

had another read, still says full boost at 3000

was replying to the quoted post not the above one, i must have been skipping around the thread a bit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...