Jump to content
SAU Community

Recommended Posts

Its a GTS-X, came in from japan with the sticker and spoiler already on it. Has a few fancy things in it. Like a self adjusting rear view mirror which i need to fix, also the electronic in cab adjustable suspension still works, but only the front as it has aus spec struts in the rear.

The plan is to stick my s13 coilovers in the rear soonish to bring it back level, will eventually go s13 coils in the front, along with r33 gts-t brakes all round and a nice set of fat wheels. And also my RB30ET will be going in along with a high mount turbo. Not sure if i'll stick with the GT3082 or if i'll go with a different turbo. Also plan to put a R31 house front bumper on it, and maybe a carbon vented bonnet. Not sure. I should probably call this one money pit 2.0.

Thanks for the positive feedback fulla's.

oh and :D

nice one ditch the wing and sticker :worship:

i had to take the clagged out adjustable suspension out of my coupe to it had two great settings spongey and boat mode gave it some coilover love and it loves it now. mine doesnt have the flash mirror thingy though would love to check that out

Spotto a mint looking bayside blue r34 in Launnie yesterday :O

if its the one im thinking of i met the guy tonight, and yeah its prime!!!

he said hes had it since 05, but just had it as a weekender

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
    • Yeah, I would have said the same. It makes me suggest that there are other things wrong, such that the ECU is totally unhappy with the broken sensor. The only other thought here is that maybe it is shorted, which might cause a different issue to the typical "disconnected" sensor.
    • The fact that US/JDM plates actually fit the skyline bumpers properly is a big, big thing for me as they are the correct dimensions. Annoyingly you can't opt for a normal plate (or plate combination) in that size. You have to make up your own one, and at that point you'd still know it wasn't randomly assigned. 
    • Well, really, that's any ECU, because it's not so much the ECU that the tuner connects to, but a laptop that's connected to the ECU. You have to have the tuning software installed locally. The "remote" part is essentially just remote desktop (RDP) or VNC type access. Nevertheless, if you're looking to upgrade, then you're immediately in the Haltech/Link territory, both of which can be done by any number of competent tuners here in Oz. But without a dyno, you'll definitely also need a wideband O2 sensor fitted, and you'll probably be relying on "auto" tuning a bit, where you drive it around under various loads and then apply the corrections that the ECU learns (basically applying the fuel trims that the ECU has to do to correct the mixtures). Tuning the timing is a little harder. It can be difficult to trust the old OEM knock sensors on RBs, so it is definitely best to have someone who knows what they're listening for, with knock ears (a piezo microphone connected to the engine, and and little amp and headphones so the listener can hear the angry men with hammers who live in the engine). That is more difficult to do remotely, and I suspect the only sane way is to be quite conservative on timing. But that's OK. You're probably waaaaay better off with conservative timing where you are. What is the fuel situation? 98RON available? Or low grade jungle juice?
    • I see your point, I didn't think too deep into it, was purely focused on the price. There's no bad blood between myself and GSM, they acknowledged the price was cheaper else where and at the time couldn't match it. 
×
×
  • Create New...