Jump to content
SAU Community

Recommended Posts

Nizpro stg1 cam and vernier cam wheel and new lifters and modded lifter cradles. $500

Turbonetics Turbo .65 turbine housine, bored out with P wheel, large compressor housing with V wheel in it. only 6 mths (2,000 km) old. mounted on an RB30 manifold with Turbonetics 45mm wastegate and 3" mandrel dump. $1800.

Custom (Davepro) polished inlet manifold with XF throttle body. $700

R33 GTR injectors with custom polished alloy fuelrail and adjustable reg. $500

HAWK laptop adjustable ECU with full loom and all sensors ready to go. $1300. (Loom tp siut R31).

Cooler piping colished stainless with typ2 bov and Large front mount cooler (490x310x75). $800 (Pipes to suit R31).

2x bosch 984 hi flo external pumps $200 each

RB30 turbo long motor in excelent condition $500

All in melboure......

Link to comment
https://www.sau.com.au/forums/topic/15313-turbo-cooler-and-other-good-bits/
Share on other sites

  • 2 weeks later...
Guest kevinjetgts

this is kevin jet gts i am enquiring about the fuel pumps , gtr injectors, cam gears, 3 ltr bottom end can you please e-mail me with your contact number asap so we can arrange the sale of these pars, i can be contacted on 042 241 3617 or 9366 0556 ask for kevin or e-mail me at [email protected]

I am not sure how much the turbo can make.......It verry easily made over 200 rwkw on 13 psi with an air temp of 43 degrees. I am not gonna make a bullshit high figure like "she will make 500 hp easily mate" as I just dont know.

The manifold is a modded stock VLt item.

  • 2 weeks later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...