Jump to content
SAU Community

Recommended Posts

Just wondering if this oil is any good? I know you all recommend much more expensive oils but things are tight for me at the moment. The guy at the shop did say this oil was recently compared to Mobil 1 Synthetic and was superior.

Has anyone heard anything bad about this OIL concerning Skylines??

I am draining the shit oil out tomorrow. I have blown no smoke and cant see any leaking anywhere but on the dipstick it is getting lower. I have heard this means the motor does not like the oil it currently contains.

Also what is the model number of the NGK sparkplugs ( the normal plugs) for the 'line and what should I gap them at (I have stocker except for air filter)

Thanks people.

Link to comment
https://www.sau.com.au/forums/topic/15408-bp-visco-5000/
Share on other sites

number for plugs is BCPR6E from memory but u should recheck

u can get it from Marlows / Repco and get a gapping tool as well ($2) and gap them to 0.8 coz they come gapped at 1.2

just under 4 bucks for one and havent had any issues with it so far (no misfiring) seems to be doing well

Link to comment
https://www.sau.com.au/forums/topic/15408-bp-visco-5000/#findComment-314881
Share on other sites

yeah my plugs were changed just recently - nissan come out with platinums and a few mechanics will recomend them to u but normal $4 do just as well. :D

Ive got Redline in the Skyline but my 300ZX has Visco in it and i havent had any probs with that oil :)

Link to comment
https://www.sau.com.au/forums/topic/15408-bp-visco-5000/#findComment-315957
Share on other sites

Mobil 1 is tried and tested amongst us so it is the go. Others have their preferences but all go for the well known brand name stuff... So there is something in that.

Plantiums are a matter of opinion. If I change normal NGK R's every 20,000 I am still saving from buying the Platiums.

Your choice.

Link to comment
https://www.sau.com.au/forums/topic/15408-bp-visco-5000/#findComment-316102
Share on other sites

  • 2 weeks later...

I just bought 5L of visco 5000. The specs look good on paper (https://www.distributor.bp.com.au/wls/servl...?cid=13&scid=14), but the true test is how it works out in real life use.

I've had enough of paying $50+ for Mobil 1, so I'm switching if this stuff delivers the goods. (Unless Strich9ine can get us all a piece of that $35 Mobil action :P ).

Link to comment
https://www.sau.com.au/forums/topic/15408-bp-visco-5000/#findComment-330061
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If your head gasket lifted, you should have seen a coolant pressure spike. There's no need for a copper gasket/fire rings at 30psi. An MLS with perfectly clean/flat mating surfaces should suffice. 
    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
×
×
  • Create New...