Jump to content
SAU Community

Recommended Posts

Just had the VL on the dyno and thought i'd post my results. A bit of background......

Stock RB30 block

Stock R33 RB25DE head, VCT hooked up.

R33 RB25DE oil pump

GT3040, 0.82 rear

RB20DET ex. manifold

550cc mazda 20B injectors

600x300 cooler

Bosch 044 pump

258rwkw on 13psi

800ish Nm (can't remember exactly)

Don't have a dyno printout ATM as the dyno keyboard shat itself, but he saved it and i should see it sometime this week.

I honestly didn't pay to much attention to the RPM/power relationship while it was on the dyno. My eyes were glued to the power figure! Like i said, the graph wasn't able to be printed at the time, so i'll have to wait till he e-mails it through.

Wastegate is an external 48mm progate mounted on a custom adapter between manifold and turbo.

ECU is a Haltech E11v2 with a 2 bar MAP sensor. The boost cut is set at 2 bar absolute (obviously) and even though the wastegate solenoid is set to provide 13psi, it occasionally spikes and hits the boost cut. Hopefully closed loop control will sort this out.

quick question guys.

If i were to do the RB30 upgrade on my RB20 equipped R31, would i be able to use the microtech i already have in it on the RB30? Also, would everything else wire up as is? or will i have to go through a huge auto electrical drama?

Also, what would redline be if you get the RB30 crank propperly prepped and balanced?

quick question guys.

If i were to do the RB30 upgrade on my RB20 equipped R31, would i be able to use the microtech i already have in it on the RB30? Also, would everything else wire up as is? or will i have to go through a huge auto electrical drama?

Also, what would redline be if you get the RB30 crank propperly prepped and balanced?

Im using a microtech with the stock RB20det loom, no problems, just use the stock RB20 sensors.

Hey,

Just got the power tune done and very happy with the results.

The car is so responsive it's not funny and I _______ mean it !

We're all quite surprised with the power output and especially the turbo.

Having the high-flowed stock turbo was always questionable, but even more than before the conversion, it spools up so quick and holds 18 psi efficiently.

I've been considering a GT35/40 onto the stock manifold but I'm now reluctant to change anything given the instant boost.

The accelleration is just exhilarating and I _______ mean it !

Tuned to 15 psi due to stock injectors we got 294 rwkw / 508 fwhp.

Next service, will go for Sard 550's and push the turbo as hard as possible.

Nengun will deliver for $674.00 !, bugger high flowed injectors..

Dyno graph posted in the RB30 results.

God bless Nissan and everyone who's been part of this conversion.

post-25026-1144206895.jpg

Edited by conan7772

15psi = 294rwkw yet with 3250rpm full spool?

Almost sounds too good to be true, if thats really the case stick with it as a GT35R will be laggier and will require more boost to make that power.

What fuel are you running?

Turbo specs?

What fuel pressure are you running? :O

could be running bigger cams to help bring down the boost level, dont really know specs of the engine..

im getting 294 rwkw with teh std RB25 @ 18psi, but with tomei pon cams..

maybe some more details on the motor will help make that tune results make more sense.

could be running bigger cams to help bring down the boost level, dont really know specs of the engine..

im getting 294 rwkw with teh std RB25 @ 18psi, but with tomei pon cams..

maybe some more details on the motor will help make that tune results make more sense.

Thats good power also.

What spec cams, and what other parts on your motor (aftermarket plenum, exh manifold, etc?)

Thats good power also.

What spec cams, and what other parts on your motor (aftermarket plenum, exh manifold, etc?)

plazma man plenum, custom highmount setup, HKS GT3040 1.12 rear housing. tomei pon cams 256 /8.5 power FC and 550cc sards, sard 1:1 fpr, Z32 afm

laggy now, but will be better suited once the rb30det is completed. full boost of 18psi at 4700rpm.

plazma man plenum, custom highmount setup, HKS GT3040 1.12 rear housing. tomei pon cams 256 /8.5 power FC and 550cc sards, sard 1:1 fpr, Z32 afm

laggy now, but will be better suited once the rb30det is completed. full boost of 18psi at 4700rpm.

wheres the std rb25??

what did you mean by? -

im getting 294 rwkw with teh std RB25 @ 18psi, but with tomei pon cams..
wheres the std rb25??

what did you mean by? -

std bottom end was what i refering to...

main thing was with Sky30's post refering to his 35/40 cracking 300kw @ 18-19 psi... and thats a rb30det.

there are things that can help reduce the psi required for certain power levels..

Edited by Craved
std bottom end was what i refering to...

main thing was with Sky30's post refering to his 35/40 cracking 300kw @ 18-19 psi... and thats a rb30det.

there are things that can help reduce the psi required for certain power levels..

Read again mate..

"Having the high-flowed stock turbo was always questionable, but even more than before the conversion, it spools up so quick and holds 18 psi efficiently"

He said he got 300kw at 18psi on the high-flowed stock turbo ...

Stock hi-flow making near 300rwkw on 15psi............. are you sure?

My 35/40 only cracked 300rwkw on 18-19psi.

It looks like stock housings to me.

The dealer I bought it from said it was a T3/T4 Hybrid.

I don't know for sure. See pics...

It was bored out to the max on the compressor housing. Bugger all meat left on the intake.

Also, before I blew up the RB25DET with this turbo, it had 247 kw.

That dyno graph is also posted.

post-25026-1144315643.jpg

post-25026-1144315696.jpg

post-25026-1144315741.jpg

post-25026-1144315833.jpg

Read again mate..

"Having the high-flowed stock turbo was always questionable, but even more than before the conversion, it spools up so quick and holds 18 psi efficiently"

He said he got 300kw at 18psi on the high-flowed stock turbo ...

No

294 kw at 15.2 psi

Power graph and pressure graph was the same test

It looks like stock housings to me.

The dealer I bought it from said it was a T3/T4 Hybrid.

I don't know for sure. See pics...

It was bored out to the max on the compressor housing. Bugger all meat left on the intake.

Also, before I blew up the RB25DET with this turbo, it had 247 kw.

That dyno graph is also posted.

Yeah, that looks very similar to the hi-flow i had on mine, but i only made 235rkw on 17psi with similar mods.

Have you had yours on a dynodynamics dyno?, be interesting to see the difference compared to the dyno you used.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...