Jump to content
SAU Community

Recommended Posts

Hey guys,

Im thinkin about gettin bigger AFM's but dont know which one to go for.....which would you use Nismo or Z32? i was gonna get Nismo because of convenience but a workshop told me to not waste my time an to go for the z32's but then i would have to change the piping that connect to the AFM's.....

Does anyone know how much that will cost or who to recommend in canberra to do the piping?

Cheers guys.

Link to comment
https://www.sau.com.au/forums/topic/155092-nismo-afm-or-z32/
Share on other sites

Hey guys,

Im thinkin about gettin bigger AFM's but dont know which one to go for.....which would you use Nismo or Z32? i was gonna get Nismo because of convenience but a workshop told me to not waste my time an to go for the z32's but then i would have to change the piping that connect to the AFM's.....

Does anyone know how much that will cost or who to recommend in canberra to do the piping?

Cheers guys.

Easy, really.

If you want to run a stock airbox go the Nismo units.

If you are happy with pods (particularly Apexi ones) the Z32 option is probably better. You can get a ready made set up from Nengun. http://www.nengun.com/apexi/super-suction-kit-z32-80mm-afm

You can get the pods to run with the 65mm units, too.

Edited by djr81

yeah im running apexi pods at the moment but i dont think its the same ones in that ad....does that kit include the pipe that goes from the pod to AFM and AFM to turbo?i cant really remember what they look like as i have only had the car on the road for about a 2 weeks in the last 10 months....... >_<

It depends what you want to do with your car. If you only want up to 350kw at the wheels then you can use the green label r33 gtst a/f meters. If you want over 350 then go the z32's as they have more resolution, What this means is it takes more air to max out the 5 volt peak that a/f meters use.

I haven't had much to do with the nismo ones but if they are 65mm then the other two options would be a better choice and i dare say a lot cheaper.

Both a/f meters will fit the standard rubber hoses they are just tight going in. The air pod pipe will need to be changed as the four bolt flange is obviously bigger on the 80mm ones.

Also if you have a power fc then you can change the settings in the computer for both gtst and z32 so that you can drive it to get tuned.If its still the standard ecu then it will need a new tune burned for it

Hope this helps

There are a range of pod filters that fit different sized AFM's. So have a look.

The advantage of the Apexi set that matches the Z32 AFM's is that you can bin the rubber hoses - these when old/tired have been known to suck in & restrict flow to the turbo.

AFAIK there is no difference between the range of the Nismo units & the Z32 units, just the size of the housing.

Irrespective of which unit you choose (Z32 or Nismo) you need to recalibrate the ECU. On a Power FC this is easy, but it is still worth checking the AFR's on the dyno once the job is done.

Make sure you get some plugs to got with the Z32's AFM's. You need to splice these into the wiring of the car. Can anyone confirm if the Nismo unit is a straight plug in, it the same as the stock plug?

nice one, thanks for the advice fellas.......

now i think ill go for the z32's but theres another question i need to ask.......

what are your thoughts on 2nd hand ones? i know im beta off goin new but i can get a pair of 2nd hand ones for $500.....but im affraid with the luck ive had that they will f*k out on me, as usual........

but do z32 AFM's have the tendancy to f*k out?

My thoughts on second hand AFM's extend as far as don't buy them. No further.

You can either get proper, new ones or the Bosch equivalent. If you know anyone who works in the parts trade you can probably get the Bosch ones quite a bit cheaper.

By the way, as far as I understand the RB25 AFM doesn't give much additional top end over the RB26 units - this despite it's larger diameter.

There is another thread somewhere on the net - maybe SAU, SDU, SOf*k or Nicoclub, can't remember - where they talk about counterfeit Z32's. Apparently there are new dodgey copies of Z32's out there and its buyer beware. I'd suggest giving eBay the flick, buy from a reputable business like Nengun, Greenline, Just Jap, Kamikaze or other ones that sell on SAU etc instead. At least they will stand by their product.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...