Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Catchcans are just a bandaid for tired engines with a bit of blowby.. kinda like my ol' rb20 :)

Edit: 40th.. I just used a larger radius for the bend or you could try ENZED or something to get some elbows :)

Edited by bubba

In racing you are required by rules and regs to run a catch can that holds a certain litreage. Also they arent there just to catch oil or bad breath from sad motors, perfectly healthy engines still have oil in the head and during corners or even acceleration oil and oil vapour can escape the rocker covers. Every engine has to breathe. A catch can just lets it breathe without feeding contaminated air into turbo/intake. If you want to run it properly/illegally, dont run it into the intake, and put a breather on your can.

  • 8 months later...
Okay, how about this?

DSC_5328.jpg

Better?

SO this last picture is the correct way for running an oil catch can, wat type of oil catch can was used. how many inlets etc, i have a Greddy oil catch can i want to fit soon, was just wondering on this thread if it was the correct way for doing it for an rb25det, anlso was a breather used here? have u had any problems or noticed a difference anywhere? hamish :rofl:

jimmytim man thats a lot of pipe. why dontcha trim it to the correct length? what can are you using btw?

hamish i dont think that a breather is used in this setup. the air is returned into the intake

the last pic is hte 100% correct way of having it

trim down the hose and it will look a lot more neat

also, if i were you i would try to mount it somewhere near the coolant reservoir in the fornt corner of the engine bay.. where you have it now is too close to the turbo and heat + oil is no fun!

ok i have a question. from what i have read in other threads, there should also be a return line from the can to through the PCV valve (relocated) and into the plenum to prevent it from sucking oily air from the driver's side cam cover on idle. does this air have to come from the can? i mean can i run a setup like jimmytim and just have the pcv valve pulling external(underbonnet) air?

ok i have a question. from what i have read in other threads, there should also be a return line from the can to through the PCV valve (relocated) and into the plenum to prevent it from sucking oily air from the driver's side cam cover on idle. does this air have to come from the can? i mean can i run a setup like jimmytim and just have the pcv valve pulling external(underbonnet) air?

It would then be a vacuum leak.

Not sure in the picture of the engine bay - where does the PCV hook in? If the can is venting to atmosphere and the PCV is still attached then its an incorrect installation. Unless you racing the car or there is a reason for excess engine breathing then just leave the factory PCV and rocker cover venting hoses standard as there is no gain on a slightly modified engine, apart from the slight reduction in octane as the oil mixes with the incomming.

post-30915-1194789818_thumb.jpg

the Positive Crankcase Valve is a one way valve, pulling air from the cam cover on idle when the intake plenum pressure is low and closing when intake pressure is high (on boost). the actual valve is in the cam cover itself so ppl usually move it to the plenum and run a hose from the catchcan to it. similar to the one going to the intake pipe after afm. so you have one hose (or 2) from cam covers to can, one to the intake pipe and another thru pcv into plenum. if the pcv is just gonna be sucking can air anyway, does it matter if it sucks ambient air?

i assume no because the hole is small for one and the valve is only open on idle. anyone care to correct me?

When installing my catch can I never blocked off the PCV as its only open on idle so not much oily air will be going in. Only install the catch can on the intake side to stop oily air going through the intercooler. – Same way jimmytim has it.

Like I said if the PCV is drawing in ambient air then it is a vacuum leak. If your still running a AFM then this air is not being accounted for and hence will slighlty lean the mixtures out under vauum condtions. And no the PCV is not only open at idle but all rpm under vacuum.

Just so some of you guys can see, this is how the mechanic set mine up. I do plan on putting to braided lines to the catch can just been lazy.

We also found I needed a breather on the rocker as it was pushing oil out the exhaust.

I also still have the PVC valve connected but again I haven't got a plug made for it, with it still connected it cause a little hunting on idle

and a flutter noise in the exhaust note when just cruising on steady idle (ie 60km/hr)

post-35997-1194837323_thumb.jpg

hey i going to install my catch can as it been sitting on my shelf of parts in the shed for ages, which is a better place to mount the can? i have provided pics. :angry:

Looking at the car from the front, i either going, the left strut tower (drivers side) or the right. howeveer the turbo is on the right in standard position.

so any advice would be good, also should i block the bottom inlet?

post-36645-1194837922_thumb.jpg

post-36645-1194838014_thumb.jpg

post-36645-1194838164_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...