Jump to content
SAU Community

Recommended Posts

Hi guys,

As some of you might know me i had this thread back in 2004 http://www.skylinesaustralia.com/forums/in...1&hl=MRPREZ

And now for the exciting part. As per my researches i have done this converion and i could claim to be the 1st R32 GTST in NSW thats have done this. and i want you guys to tell me what you think about it.

ok now to what i have done:

Engine: RB30 buttom end with RB26 Head, PAR rods, Arias pistons(High compression), balcnced standard crankshaft.

SARD 800cc injectors

Standard GTR fuel rail

Single Ford throtle body ( for easier tuning )

Same custom exhaust manifold

Same Tial 38mm gate

GT42R with 1.16 Exhaust housing :(

Standard Camshafts

Standard RB20 Radiator :)

Bosch 044 Fuel pump (Intank) :)

E-Boost 2 running max 16 PSI

--- Performance ---

16 PSI made 342 rwkw = 466 rwhw

At WSID:

I ran a 11.20 at 122mph with 60" of 1.58 with standard RB20 box at 12.8 PSI that got away with it that day but in october 2006 i snaped the output shaft :yes:

Now i have a Series II RB25 box which is hell alot stronger.

Im pretty happy with my old box that lasted me taht long and the gears are still good in it except the output shaft :yes:

If you guys are interested to share some info about the mods just PM me.

Until more news

Babak

Edited by MRPREZ
Link to comment
https://www.sau.com.au/forums/topic/155685-verry-impressive/
Share on other sites

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Thanks Guys,

T04Z rated at 800 HP. (Depending on the housings)

As i said my housing is 1.16 which is preetty big specially for a GT42R.

:happy:

Im sure at some stages you can do this conversion. i know its costy but its a good fun :happy: Godd luck in the futur.

T04FTR ---- in terms of the response, its pretty responsive compare to my RB20 with GT3040R. with my GT3040R in my RB20DEt i was getting full boost at 4600rpm but ut was pretty slugish. BUT with my new setup boost kicks in at 5600RPM but i can feel it pulling before it hits full boost.

i took the car to WSID in november last year just to test it out how it goes with street tires, i tried it at 16 psi ( my max boost setting) and the car was going sideways all the way in 4th gear ( from 2nd gear i put my foot down) and i finished the 400m in nutural :mellow: that day i manged 13.0 @ 116 mph at 10psi.

Also as i mentioned befor my Exhaust housing size is 1.16 which is pretty big compare to ordinary T04Zs. Coz my turbo has been customly built for my application.

Its pretty pointless to darg withought my Mickies.

Cheers :)

Edited by MRPREZ

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...