Jump to content
SAU Community

Recommended Posts

Hi, I want to get 19"*8.5 +20mm offset with 235/35 tyres front and 19"*9.5 +25mm offset with 265/30 tyres rear for my R32 GTST, my guards are already rolled and i have Cusco adjustable coilovers. Does anyone know if they will fit ? :happy:

Edited by SNISMO
Link to comment
https://www.sau.com.au/forums/topic/155711-19-on-32-gtst/
Share on other sites

It'd go close.

With a +40 on the front you may run into issues with the inside edge scrubbing on the inner guard or possibly the upright. +30 with 17*8.5 works well on the front of mine. The rear would probably fit, but i just can't see those tyres fitting under the stock guard. +40 will put the inside edge of the rear rim pretty close to the the hicas balljoint and the front of the lower control arm. Depending on the camber it will also be very close to the struts/coils of your coil overs.

Link to comment
https://www.sau.com.au/forums/topic/155711-19-on-32-gtst/#findComment-2897228
Share on other sites

Probably not as the wheel itself is so big.

You can get away with it on 17's, maybe 18's, dunno about 19's, it would depend how low your car is i suppose.

You can always try some wheels out to get a better idea.

Link to comment
https://www.sau.com.au/forums/topic/155711-19-on-32-gtst/#findComment-2897744
Share on other sites

I just found out that the wheel offsets are +38 front and + 40 rear. Any better or is the rear still going to be a hassle ? Thanks for your helping me out with this too guys, offsets confuse the hell out of me...... :)

Edited by SNISMO
Link to comment
https://www.sau.com.au/forums/topic/155711-19-on-32-gtst/#findComment-2900353
Share on other sites

man it is fine!!!

I have 19's (8.5 @ front, 9.5 @ back) looks SOOO hot, (but im bias..its mine)

U need some really stiff sus, (which i presume ur coilovers are) I have D2 drift spec, adjusted to the stiffest degree. This ensures you can drop it as low as you can!!! :wub:

I think my offsets are the as urs too.

my fronts needed 225s as the tyres were scrubing against teh strut (i was originally trying 245s with no luck). At the rear i am running 275s look hot as when viewing hte car from the back, and likewise my guards are rolled too.

Good Luck,

Peter :iluvff:

Edited by SEX-DR.
Link to comment
https://www.sau.com.au/forums/topic/155711-19-on-32-gtst/#findComment-2905288
Share on other sites

man it is fine!!!

I have 19's (8.5 @ back, 9.5 @ back) looks SOOO hot, (but im bias..its mine)

U need some really stiff sus, (which i presume ur coilovers are) I have D2 drift spec, adjusted to the stiffest degree. This ensures you can drop it as low as you can!!! :wub:

I think my offsets are the as urs too.

my fronts needed 225s as the tyres were scrubing against teh strut (i was originally trying 245s with no luck). At the rear i am running 275s look hot as when viewing hte car from the back, and likewise my guards are rolled too.

Good Luck,

Peter :iluvff:

post-9040-1171424389.jpg

Link to comment
https://www.sau.com.au/forums/topic/155711-19-on-32-gtst/#findComment-2905320
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...