Jump to content
SAU Community

Recommended Posts

Hi guys, I finally got around to getting my guages installed.

Full credit goes to Maroun(spelling) & the boys down at Race Solutions in Penrith.

Has anybody installed an autoguage A/F ratio guage that has the warning light? I need to know how to turn off the warning buzzer as it's really starting to tick me off. The instructions say to refer to back page but there was never a back page when I bought lol.

post-29425-1171276040.jpgpost-29425-1171276114.jpgpost-29425-1171276329.jpgpost-29425-1171276396.jpgpost-29425-1171276460.jpg

Edited by Yo-Yo
Link to comment
https://www.sau.com.au/forums/topic/156040-just-jap-autometer-guages/
Share on other sites

I have to say, that install looks awesome mate :laugh:

Cheers! :)

As I said before, Full credit to the team at Race Solutions (next to HITMAN) in Penrith.

It was a bit complicated to get them fitted, the stock guages are a single piece with a flat window that sits behind the pod holes. They had to make a custom mounting bracket to fit them properly.

I'm very pleased with the result :D .

how come u didnt match em? they look crazi dont get me wrong but i would of matched em all.

how much did u pay for em all was thinkin about upgrading aswell

are you serious? If you look at the pictures it seems like the A/F guage changes colour...

PS awesome install and guages, ordinary pictures! :D

are you serious? If you look at the pictures it seems like the A/F guage changes colour...

PS awesome install and guages, ordinary pictures! :D

The original pics are about 2-3 megs lol :laugh: Some people still use dial up you know :)

how come u didnt match em? they look crazi dont get me wrong but i would of matched em all.

how much did u pay for em all was thinkin about upgrading aswell

Thanks for all the replies Guys. Keep 'em coming.

Andru, they are all the same colour, I'm guessing the a/f guage turns red when the warning light goes off a certain number of times. Maybe it's to distinguish that guage to let you know something funny is going on. Don't know why it turned on, The engine was off & had the car on ACC :O only happened once so far.

Cost of install all up was $450. Worth it when you consider the final finish of the install & the fact that there was a bit more customisation compared to a regular guage install.

Cheers everyone! :dry:

Love the gauge carrier....do they do one for the R33 ??

That's the stock centre console guage cluster for the r34. You could probably buy a triple guage cluster & mount it in a similar position, but it won't look as good.

A defect in NSW too if the guages go above the steering wheel I think (Edit, Just read you're from the UK lol)

Edited by Yo-Yo
  • 5 months later...

Its probably doing it because your engine was off. I have the same A/F guage, except without the warning light. If the engine is off, the reading will obviously be low. If the engine is on, and the reading is still low and the warning light on, then I'd say you o2 sensor is gone. Thats what happened to me when I had mine installed. Once the o2 is changed, its all good :thumbsup:

Good luck... great looking install :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
×
×
  • Create New...