Jump to content
SAU Community

Recommended Posts

Look ive been told to arrange a cruze for 16/2/7 (sat)

we done one last week and it went off, apart for other cruzes going on.....

well it's gona be at 12:04pm at Wellington Pt departing at 12:30, then taking

the back roads of the Redlands to the M1 and all the way to the coast for a few

laps, then to the spit for photo's.

Then link up with another cruze from clubhighrollers, wait till you see 2OWNU

(R32 yellow) lots of cars lots of chicks lots of fun.....

so what do ya say???? will ya come?

Link to comment
https://www.sau.com.au/forums/topic/156620-calling-all-skylines/
Share on other sites

2 parts of the cruze Its time for something a bit different than the usual saturday night local gold coast. Thus Kynee from SunshineCoastCruising.com and I are doing a Sunshine Coast Run this Saturday night! If you're looking to meet some new people and perve on some new and different cars come along for a good night out! :xcited:

Details are as follows.

MEET 1

7pm - 730pm DFO Shopping.

Airport Drive, Brisbane

(Travel 49.24 km,Est. Time 33 mins)

MEET 2

805 - 815pm BP Service Station

Morayfield

(Travel 51.1 km,Est. Time 35 mins)

MEET 3

8:50 - 9.15pm Bunnings,

Caloundra Road, Caloundra.

MEET 4

935pm - 10pm Boat Ramp Car Park,

Parkyn Parade, Mooloolaba.

up date first post dude....

ha ha ha Sat is the First day of Chinese New Year!!

so if you crusie tommorrow you'll be crusing all year... Dont crash tommmorrow or you be crashing all year!!!

oh sorry for going off topic but i would like to swing by if its the DFO meet up...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
×
×
  • Create New...