Jump to content
SAU Community

Recommended Posts

Hey guys I’m having a lot of problems with my car battery, its relatively new but my car security system keeps sucking the life out of it. If I don’t give my ride a run for two to three days the battery will go completely flat. I just wanted to know what type and size batteries every ones running as I don’t even know what the slandered size battery for the r32 GTS-T is.

I’m currently running a 380cca Supercharge Gold

I just don’t what to put in something to big as the last thing I want is to start having starter motor problems

(also I have alternator and its charging fine)

Link to comment
https://www.sau.com.au/forums/topic/156729-batteries-how-big-can-i-go/
Share on other sites

if you be sensible, there's not really such thing as too big.

that is, don't go for like 50000 cca or something.

I've used 800cca or even 1000 cca batteries in cars (not my skyline), but have never had a problem.

But honestly, for you, I don't see why 4-500 cca won't be absolutely massive.

I used to use a 280 cca battery in my skyline and it was perfect. I coudl run the stereo for a while (i don't have a fully sik sub though), starts fine after leaving it for a couple weeks. Powered my alarm fine.

Bigger is only better if you have a reason to need more power than stock.

Hey guys I’m having a lot of problems with my car battery, its relatively new but my car security system keeps sucking the life out of it. If I don’t give my ride a run for two to three days the battery will go completely flat. I just wanted to know what type and size batteries every ones running as I don’t even know what the slandered size battery for the r32 GTS-T is.

I’m currently running a 380cca Supercharge Gold

I just don’t what to put in something to big as the last thing I want is to start having starter motor problems

(also I have alternator and its charging fine)

I had this problem with my R33. There's a relay in the computer that stops functioning properly. It took a couple of days diagnosis from my sparky. the only way to find it was to put a multi-meter across the battery, then you would hear a faint 'tick' from the computer. this was the only way to reset the relay, so they re-wired it and fixed it. It's not a faulty battery, I'd get soemone to look at your computer and see if they can fix it. They guys i had look at it were at The Battery Terminal in Jameson shops.

You don't need to be looking at the battery CCA (cold cranking amps) you need to be looking at the capacity of the battery. Try having a look at some of the dry cell batteries (Oddysey, Optima & similar)

At the end of the day, however you need to find where the drain is going to.

thanks guys. ill have the wireing cheched, but its not exsacly your everyday security system. it has so many exspantions and seperate systems running ints not funny. but ill check it out. i had it all installed at supper audio installations, and when i had it installed they told me my battery was probably to small. but ill get them to double check every thing aswell as looking into the computer realy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
    • Did some FASTing ...got the impression that the actual part# was a moot point ; seems all of these hardlines for coolant are discontinued/NLA... like, I take it you're after the hardline that bolts onto to the manifold...that's NLA according to amayama & nengun .... ...just to clear up some confusion, they typically mounted the AAC valve to the intake manifold somewhere near a coolant passage, so the body of the valve heats up & holds it open when engine's up to temp - no coolant flows through the valve, it's a mechanical, thermal connection.
×
×
  • Create New...