Jump to content
SAU Community

Recommended Posts

Hey guys,

I recently received a HKS EVC VI (instead of the V I ordered) and have successfully installed it and have it set up to some limited extent (I.e, it reaches peak boost and holds it. I think I was lucky to make it that far).

There are still some features I'd like to be able to tinker with that are listed as features.

Does anyone else have one of these and know what each function in the menus does?

Cheers guys,

Shayde

Link to comment
https://www.sau.com.au/forums/topic/157185-hks-evc-vi-boost-controller/
Share on other sites

post a photo of your controler. The latest is able to plug in to a laptop i beleive.

they are only up to 5 versions so far

http://www.hks-power.co.jp/products/electr...img/evc-b-2.gif

this bieng the 4th

and this bieng the 5th and current

http://www.hks-power.co.jp/products/electr...g/5_evc_img.jpg

Edited by Angus Smart

I have this one. However the manual posted in post #2 is a manual for an EVC 4 (according to your post)

even though it was 5 in the file name. I've found this to be consistent in all english manuals I've found.

nengun-1163-00-hks-evc_-_v.jpg

yeah, there is alot of confusion all over the place. i spent a while looking for a manual that was for the 4. which seems to be called the 5.

you can get software to set up that controler there is a pc program avaliable

installed mine over the past few days, got hold of an english translation for it, ask me any questions, ill try to answer them as i seem to have figured most of it out. Did the full boost mapping, ie throttle vs rpm boost map.

(evc5 in japan, evc6 elsewhere)

http://www.hks-power.co.jp/faq/evc/rekievc.html

found this link, english manual for latest evc :

http://jscosysv.tresham.ac.uk/~awillis/S15...EVC5_Manual.pdf

approx 10mb

Edited by chook

Can anyone advise me which is the best hose to connect the boost sensor to for a NEO engine, photos would also be great. did mine but the hose goes to some sort of electric solenoid box at the top back of engine, wondering if this would contaminate the pressure levels. thanks

  • 7 months later...

Hey Guys bought same controller as well... just wondering what u guys have ur setup @ for a RB25det stock Turbo??

E.g. Base Boost 8psi, Option A= 12psi Option B=10psi and Scramble Boost = 14-15Psi for X sec... etc??? Ta

-SeS

Hey guys, my EVC 6 reads well above my HKS analog gauge, seems to be a normal thing. Mine reads about 3 psi higher. Mines also set up according to the diagram and holds boost very nicely. My only peeve is that it reads the wrong values.

Hey Shade do u have a aftermarket BOV??? my plumback return is blocked off cuz of my Bovus Maximus BOV... i'm not sure if that affects it???

Where is ur middle nipple (1) attached on ur Stepping motor.. mine is off the compressor that returns to the Turbo.., Nipple 0 is on the actuator n nipple 3 is off the return line that Tee off the regulator and the plenum... sound about right????

What was ur Initial Setup.. E.g. Max Wastegate boost @???

TA

-SeS

Edited by Black_CSR

SeS,

Yeah, I have a low mount, internal gate. Aftermarket turbo and BoV. Same block off thing going on. I can't remember exactly without looking and it's cold outside :rofl:

Okay, had a look. First nipple (on the left with the bracket facing backward) goes to actuator on the turbo. Middle nipple goes to intercooler piping. Last nipple on the right goes to the same line that all my boost gauges feed off.

My initial set up.. Just set my max boost to 12psi with boost warning set to 13.5psi and boost drop set to 3psi. All the offsets at 0.

Hope that helps!

Shayde

My middle nipple doesn't go back to the intercooler nipple cuz it doesn't have one.. but instead it goes back to the compressor line which goes back to the turbo... not sure if that it?

I'll try to get a nipple on my intercooler n hook it up to that.. n c if it makes a difference

Where do u set the boost warning??? the next option after setting up max boost/stable boost is choosing the boost level for option A & B......, where is the boost drop set option???

Ta

-SeS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...