Jump to content
SAU Community

Need Help Rb25det Problem!

l0WRB

By l0WRB,
in Engines & Forced Induction

 Share

Recommended Posts

aphid Proficient

aphid

Posted
Posted
im running a HKS GT2530kai with a stock ECU and SAFC II, is this bad? can the same prob. occur with mine if i boost it too much?

it all depends on your ability to tune the SAFC, but if the SAFC is tuned with acceptable air fuel ratio's and the engine isn't pinging out of it's brain, as in this case, then no.

MKDR33 Mentor

MKDR33

Posted
Posted (edited)
it all depends on your ability to tune the SAFC, but if the SAFC is tuned with acceptable air fuel ratio's and the engine isn't pinging out of it's brain, as in this case, then no.

my SAFC was originally tuned with the stock turbo was on, i havnt tuned it with the 2530 yet, but it seems to be running fine at 1 bar so far, anything over 16psi and i get fuel cut..

im hoping a Z32, Walbro pump and re-tuning of the SAFC will fix this problem..

P.S. Sorry for stealing thread l0WRB

Edited by MKDR33
l0WRB Mentor

l0WRB

Posted
  • Author
Posted

yeah i woudnt be boostin it over 7psi! trust me i never heard once Detonation, i owned 2 vl calais turbos b4 my 33 and i know wot detonation sounds like! then again once aarons highflow turbos come onto max boost there fkn loud as!

l0WRB Mentor

l0WRB

Posted
  • Author
Posted
wow look at the green 32 in the background of the photo 7 of the first group of pics.

looks like it goes alright haha.

yeah its only got 400rwhp and some random dude called nick81xd owns it, how random he is building my engine 2? haha the white skinny guy in the pic!

l0WRB Mentor

l0WRB

Posted
  • Author
Posted

quick update

ive decided on putting in a set of wiseco forged pistons with new rings and some big end bearings and new head gasket and bolting it all back together..i dont know if it's worth shot peening the rods..anyone else had problems with standard rods at 300rwhp?

Adriano Grand Master

Adriano

Posted
Posted

rods will be fine, are you fitting oversize pistons? i would agree with paul, that there is no way the highflow has caused this directly, i would be checking your fuel pump, and your breather setup. I bought a vl with an r34 motor with 4 cracked pistons due to the breather hooked up to the intercooler piping, which meant the turbo was pressurising the crankcase causing detonation at 7 psi.

l0WRB Mentor

l0WRB

Posted
  • Author
Posted
rods will be fine, are you fitting oversize pistons? i would agree with paul, that there is no way the highflow has caused this directly, i would be checking your fuel pump, and your breather setup. I bought a vl with an r34 motor with 4 cracked pistons due to the breather hooked up to the intercooler piping, which meant the turbo was pressurising the crankcase causing detonation at 7 psi.

i installed a walbro 255ltr fuel pump and car had a catch can hooked up both breathers were venting to a filter thru the catch can so i dont think it would be any of the above...hmmm mite get the injectors cleaned and flowed

Adriano Grand Master

Adriano

Posted
Posted

Im not sure, but ive heard bed things about the walbro's ability to flow at higher fuel pressures, i doubt that its injectors, as 4 of them would have to be blocked for this to happen. I suppose the other thing that could cause this is an afm problem causing it to run lean. How do the plugs look? And is the cas near the centre of its adjustment?

l0WRB Mentor

l0WRB

Posted
  • Author
Posted
Im not sure, but ive heard bed things about the walbro's ability to flow at higher fuel pressures, i doubt that its injectors, as 4 of them would have to be blocked for this to happen. I suppose the other thing that could cause this is an afm problem causing it to run lean. How do the plugs look? And is the cas near the centre of its adjustment?

walbros seem fine if u get a proper one,i know of a few mates cars making 400rwhp with this same pump..when i first imported the car start of last yr it felt really sluggish..noticed the timing was set at 0 degrees..set it to 15degrees and left it at that..and the cas is more like all the way left arm down..

proengines Rising Star

proengines

Posted
Posted
quick update

ive decided on putting in a set of wiseco forged pistons with new rings and some big end bearings and new head gasket and bolting it all back together..i dont know if it's worth shot peening the rods..anyone else had problems with standard rods at 300rwhp?

Have a quick look arounf for a set of RB26 rods. They should be cheap as dirt given how cheap aftermarket ones are. They are a straight bolt in and vastly stronger than the 25 rods. I've seen plenty of broken RB25 rods, never seen a broken 26 rod in that type of application.

Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted (edited)

hahahahahahaha OH MAN. that is so funny. Who the hell did that?

ohhh yeah can we see some clear pics of the broken pistsons?

cheers

rods will be fine, are you fitting oversize pistons? i would agree with paul, that there is no way the highflow has caused this directly, i would be checking your fuel pump, and your breather setup. I bought a vl with an r34 motor with 4 cracked pistons due to the breather hooked up to the intercooler piping, which meant the turbo was pressurising the crankcase causing detonation at 7 psi.
Edited by Guilt-Toy
l0WRB Mentor

l0WRB

Posted
  • Author
Posted
hahahahahahaha OH MAN. that is so funny. Who the hell did that?

ohhh yeah can we see some clear pics of the broken pistsons?

cheers

this is the best piston outta the 4..the worst one i left in a mates car!

but you can see the cracks pretty easy

also a picture of the bore in cyclinder 3 where the piston ringlands fell apart once the pist came out

not a mark in there

post-29137-1173229076.jpg

post-29137-1173229152.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • Matt Z
      SAU NSW - Bathurst Run 2025

      By Matt Z · Posted

      🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...