Jump to content
SAU Community

Recommended Posts

Last friday I installed a Gates Racing timing belt, new idler& tensioner pulleys (and idler pulley bolt), aswel as a new Tomei adjustable exhaust cam gear (now set at 4degrees retarded).

Had the car re-tuned today to suit the new adjustment. Last dyno run made 248kw

now makes 260kw :D im stoked with the result! power comes on earlier, smother, and with a touch less boost (17 psi rather than 18). All my runs are on BP ultimate 98 octain fuel.

theres a few pics below of the belt, cam gear & dyno sheet.

for those who dont know...the cars basics: Stock engine

pod filter

FMIC

AVO hi-flow turbo

big injectors

big fuel pump

adj fuel reg

tuneable ecu

turbo back 80mm zaust & hiflow cat

post-7879-1172573321.jpg

post-7879-1172573826.jpg

post-7879-1172573954.jpg

Link to comment
https://www.sau.com.au/forums/topic/158351-new-dyno-results/
Share on other sites

do you find it a big boggy now that youve taken off the factory VTC solenoid ?

VTC is still there (just not in the photo). Its more resposive than its ever been now

Just a few questions:

1) Did u consider adding an injector instead of getting 6 bigger ones? Is so y did u choose to go bigger

2) How much more can ur highflow turbo do?

3) At what point do u reckon ull start to need to do internals?

1) No. Maxed out my stock ones at 220kw...so got bigger. Only $20 difference btw 550 & 840 so I just chose the bigger because I know there a pain to change an now i'll never have to do it again :(

2) the turbo can be pushed to about 22psi safely....but my head gasket can cope with that as its still stock.

3) most people say at about 280-300kw is where you should be looking into forged pistons (even though the stock ones are forged) and better rods (most people use linished GTR rod)

So by retarding the exhaust cam 4degrees, you gained 20kw atw?

Nice work.

aswel as re-tuning the car to suit :)

Yeah, I was over the moon! my tuner cant believe the power my car makes with stock engine an small turbo. Its averaging around 12.5 A/F ratio under load too which is still a safe tune. could get more if i leaned it off an ran more boost....but i dont want to. Maybe for a few runs on the Dyno at Autosalon to impress...hehe

thanks mate!

No real plans for further power. more power = bigger turbo & engine bottomend rebuild to cope = expensive

just hunting down some nice rims now an thats about it

just having fun with it this year, few deca days track day & drift training days....

by tunable i mean aftermarket. I run a microtech LTS-12 :(

looks like now with that little extra power im in need of a catch can....few reports of seeing blue smoke from my car after full throttle acceleration then backing off....its creating a bit too much pressure an the oils getting by, so catch can will rectify this.

thanks to those for letting me know

looks like now with that little extra power im in need of a catch can....few reports of seeing blue smoke from my car after full throttle acceleration then backing off....its creating a bit too much pressure an the oils getting by, so catch can will rectify this.

thanks to those for letting me know

Yeah I was tellin Kris about that...I was behind you and was coppin a fair amount of blue smoke...thought somethin might have been wrong...then a few times right after the blue smoke would be a pretty thick puff of thick white smoke...

nice result mate....got mine sitting there and was going to to the belt soon...

I saw the blue smoke when u backked off...was going to pm u about it but forgot...

nice result...I hope I get some similar gains...will try with a de-cat setup just for the dyno to see the difference between my hi-flo cat and nothing...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...