Jump to content
SAU Community

Recommended Posts

FMIC don't really give power.

Is your POD exposed or boxed up(enclosed)? If its exposed your probably losing power right here compared to a standard airbox because of the heat from the engine bay.

Power isn't everything take your car to the drag strip and see how it performs against other cars with the same or more power.

Its ONLY A dyno reading, its used for tuning get your powerfc in wack in more boost and tune it and you will get the results or thereabouts.

Just get the power fc in it, the stendard r&r is far more severe on the r34 than the r33. I dyno'd a stock r 34 gtt, then he went away and got a million dollar front mount, million dollar exhaust, and brought it back, gained 4 rwkw, and lost about 30 kw in the midrange. looked like a rollercoaster. How does your dyno graph look?This one had 2 or 3 skijumps instead of the usual one for a r33)

for 33's i disagree, I've heard people say 12psi through 33's stndard cooler but with my own s2 i found that bloody unlikely as mine was majorly miss behaving with the standard smic.

drop a free'ER flowing fmic and piping and walla...she stoped nock,backfiring an just drove like a frign dream.. after that.

I get a jjr split front an dump, this weekend, im putting in my widebody 3" catco with it on my 3" cat back and il let you all know what she's like @ 10psi

the stock maps scale up when inc boost, so is it a rising rate when inc boost so the car literally runs worse afr;s or they come down a bit ?

The afr's get heaps worse when upping the boost, even standard they can go off the scale(<10:1), and it just gets worse from there, the other major problem is that the computer pulls out heaps of timing which loses any powe gain you would have had.

184rwkw @ 9psi with boost dropping hard (midrange was at 13psi)

FMIC, Pod

Zorst with terrible cat (changed now, goes better)

Avcr (hate it)

Power FC

Somehow want to hold 14psi and make 200rwkw, we'll see if i can sort the boost dropping issues out.

Edited by jazza08
for 33's i disagree, I've heard people say 12psi through 33's stndard cooler but with my own s2 i found that bloody unlikely as mine was majorly miss behaving with the standard smic.

drop a free'ER flowing fmic and piping and walla...she stoped nock,backfiring an just drove like a frign dream.. after that.

I get a jjr split front an dump, this weekend, im putting in my widebody 3" catco with it on my 3" cat back and il let you all know what she's like @ 10psi

the stock maps scale up when inc boost, so is it a rising rate when inc boost so the car literally runs worse afr;s or they come down a bit ?

This is an r34 thread so this post is completely irrelevant and will only serve to confuse people who don't read carefully.

FMIC in r34's rare give any power. This much is true.

Dyno's do give very different read outs and are not comparable without controlled circumstances. For instnace, I went to Bel garage Mainline dyno one day and got 255rwkw, a month later on a similar day weather wise, with no other changes, I got 256rwkw on the Dyno Dynamics dyno at UAS.

Now if I went to Bel and got 255rwkw and you went to UAs and got 255rwkw I would not expect that they would have identical power until both cars had been on the other dynos.

ps. I now have 272rwkw on Unigroup's Dyno Dynamics dyno but got over 300rwkw on another dyno.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...