Jump to content
SAU Community

Would Anyone In The Act Be Interested In Having Their Ecu Remapped For $50?

CEF11E

By CEF11E,
in Australian Capital Territory

 Share

Recommended Posts

CEF11E Veteran

CEF11E

Posted
Posted

I have now been tuning ECU’s for about 2 years and have had excellent results. I have tuned everything from completely stock cars to highly modified with larger injectors, turbos, AFM and even methanol injection. I have currently have the equipment to tune R32, Cefiro, Silvia, 180SX, Laurel, 300ZX and a few others. I can not tune R33 skylines due to the chip used.

I have all the equipment and have the ability to do map tracing and socketing ecu’s. All you have to do is pay for the dyno time and a bit to cover my costs.

You would have to allow for 2 hours dyno time and $50 for my efforts and cost of chips, sockets, travel, and time. Normally people would charge a minimum of $350 for this service.

You will get a new fuel and timing map to suit your mods, speed limiter and rev limit set to whatever you want, mass AFM sensing will be removed so no more “boost cut” and all will be checked on the dyno. You will have better power delivery and in most cases improved economy and heaps more power.

What I will want in return is a before and after printout of the dyno runs to show the performance gain achieved. Mainly so I can have some testimony from customers. That’s all I ask

Below is a couple of graphs of cars tuned by me.

100_1189.jpg

R32 skyline RB20DET Slide hiflow, Stock injectors, RB20AFM, GTR fuel pump 14psi.

dyth.jpg

R32 skyline RB20DET Slide hiflow, GTR injectors, RB20AFM, GTR pump 18psi.

If you are interested please PM me.

Thanks!

CEF11E Veteran

CEF11E

Posted
  • Author
Posted

I am unable to do R33's due to the type of ROM they use. the chips are $100 each and you can only write to them once :0 so each retune needs a new chip. and I don't have a suitable programmer :)

With R32 skylines and other nissan ECU's they used an EPROM that can be erased and reused.

Cheers!

yaf28f Rising Star

yaf28f

Posted
Posted

Hey Nic,

I will most likely be interested in this after I get my GTR changed to Canberra Rego, had abit of delay the last couple of weekends due to the rain. I think my car was running pretty rich hence the dirty bumper that you usually see when I drive the R32 to work.

Michael

CEF11E Veteran

CEF11E

Posted
  • Author
Posted
hey mate can you remap s14 series 2 ? Also have much roughly when every thing is done ?

Hi Cambo. Yes it can be done but it gets expensive very quickly

With The S14 there are 2 different types of ECU. 1 can be tuned and the other not. You need to fit a daughter board with 2 eproms. the daughter board is $100 eproms a few $$$ and than tuning. all up including dyno time you would be looking at between$600 and that is if your ECU is the tunable one :ninja: if not you would have to hunt around for the correct ECU and would probably pay $200 for one. by that stage you are into Power FC territory.

shredder667 Rising Star

shredder667

Posted
Posted
Hey Nic,

I will most likely be interested in this after I get my GTR changed to Canberra Rego, had abit of delay the last couple of weekends due to the rain. I think my car was running pretty rich hence the dirty bumper that you usually see when I drive the R32 to work.

Michael

really? i'd just come to accept this was the price i paid for buying a white gtr. i may be interested in that case. so i'm assuming you can still work some magic with a completely stock 32gtr?

CEF11E Veteran

CEF11E

Posted
  • Author
Posted

a completly stock GTR will benifit the most from a remap :) they run ultra rich from factory 10:1 at full throttle and also have a slightyl erratic timing map.

you can gain 30rwkw with just a remap and no other changes :D you will also have better fuel economy and less black crap!

My car is the one in the 2nd pick making 238rwkw (now a bit more) and i never get any buildup on my bumper. (it is black already) but if you wipe it no soot comes off:)

shredder667 Rising Star

shredder667

Posted
Posted (edited)

count me in then. just gimme a couple weeks for some funds to come in.

edit - having never chucked a car on a dyno before how much would i be looking at for dyno use and would there be an ideal dyno in canberra to use? cuz obviously i'd rather use an accurate one!

Edited by shredder667
Viper_r32 Community Regular

Viper_r32

Posted
Posted

well it looks like my turbo has finaly bit the dust. so im looking at getting it high flowed within the next 4-5 weeks. once thats done i'll finaly get you to tune mine.

CEF11E Veteran

CEF11E

Posted
  • Author
Posted

no probs ;) happy to help.

checkout sliding performance turbos :D thats what have put on mine and 240rwkw later i am really happy with it. they cost around $1000 vs $2000 for a GCG hiflow

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...