Jump to content
SAU Community

Recommended Posts

What stock rims 16" & 17",any make and model of car,will fit the rear of an r33.

And do any of these require spacers.

Atm i have paid for the sau drift day and i have a set of tyres that need rims due to the fact of there not being any tyre changer there on the day.But i cant use them unless i get some rims to mount them on.

I have a pair of stockers but i have a feeling they wont last all day.plus it would be good to know what cars have the same style of rims that are able to be interchanged.

Another reason also is i dont want to pay exuberant prices for a set of rims that might see their day.

Craig.

The falcon ones definately fit, i dummied one onto my gtst and used it for a real spare for my trip to perth, just dont get the steelies coz they dont clear the brakes, gotta be alloys

Hey, as dissapointed as i was for having to put a falcon rim on my car, was better than a space saver, and if you pry the badge out with a screwdriver, its just another alloy

Another thing i learnt was to go to tyre joints and ask for second hand tyres, i got a tyre, fitted and balanced for 20 because they only had one, 60% tread

  • 11 months later...
  • 6 months later...
The 17" supra wheels are 9.5" for the rears with an offset of +50. Fronts are 8" wide with same offset of +50 and they'll clear the 4 pot brakes.

with +50 offset chances are they wont fit at both the front and rear without spacers (UCA and rear tie rod end), some 25mm spacers all round would do the trick.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...