Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

stock ecu, stock everything else lol (bs)

added the air fuel ratio which is basically what i remember seeing on the screen for run no.2, although this is the print of run no.3. uses the same scale as the boost, so you get the idea, it went rich as the high 9's at the top end.

this is where the powerfc will come into it. i guess it means my pump and injectors will handle a tiny bit more too if they can still run that rich at 6000rpm. even the peak at the end was 10:1.

post-26632-1173693932.jpg

:wave:

yeah, buster is top of their 6 cyl forced induction list.. and 2nd, 3rd... lol they ahd a few big power printouts on their wall.

apparently adam is the guy to get down there, but he is jetsetting a bit so you have to ring ahead. They were happy to install fuel pumps, injectors and ecus... but werent really a mechanics place. JEM=Just Engine Mangement after all.

Nice photos there! Only one sexy silver s2 lol....... Who owned RUSSIA? Can't belive i beat him haha......Now i just need some mods and i'm away....QRIO5E, i willl be going to livo exhaust soon, so i'll let ya know we'll cruise down there.....

Nice photos there! Only one sexy silver s2 lol....... Who owned RUSSIA? Can't belive i beat him haha......Now i just need some mods and i'm away....QRIO5E, i willl be going to livo exhaust soon, so i'll let ya know we'll cruise down there.....

Haha you only beat him by like 2kw's or something but I'm positive he can drive better..

Not to mention Kirill's car also ping's so there is something wrong with it..

russia only did two runs i think, it was pinging badly. his was stockish too. very nice looking kit tho, especially after you washed it in my front yard you water theif... lol

bit of drift damage too.. looked awesome. chunky ass tyres.. i rememner all.

russia only did two runs i think, it was pinging badly. his was stockish too. very nice looking kit tho, especially after you washed it in my front yard you water theif... lol

bit of drift damage too.. looked awesome. chunky ass tyres.. i rememner all.

thanks dude... was nice to meet you.... :happy: come around, still some of my water *beer that is* if you want one day .... LOL

Haha you only beat him by like 2kw's or something but I'm positive he can drive better..

Not to mention Kirill's car also ping's so there is something wrong with it..

beat me by only 0.8kw... that's huge number... :happy: was MR33 on stocks rims? u know if i put stock on i will make more power on that thing... :D

PS: damm that ping thing... need help to fix it up anyone?

yeah you need some management unfortunately, but try resetting it first. just take off the negative battery and leave it overnight or press the brake a few times to get all the power out of the ecu., then turn on and let your car start from the nissan maps again.

or get someone with consult etc. to reset it. Some say it doesn't do anything, but i used to reset mine after each major mod and got a ridiculous power figure off the stock ecu, so i dunno. may aswell.

power fc is in now and car feels so much better, especially between about 2500-3500rpm.. thanks brad you are the champ *rocky theme music*

Id be knocking the timing back via the CAS to prevent it from detonating if thats the case. With a stock ECU fitted and the base timing correct it should not be pinging at all.

PM me if you need to know how to knock the timing back and check it.

Adam is a top bloke id agree. QRIo5E if people want to use Adam im sure they can call him and organise the work themselves instead of using you as a middle man. Im sure adam would rather run HIS business like that as well??

Recommendations are all very well but people can organise their own work.

Jeff glad to here your happy with the car. It does have a really nice midrange, I spent alot of time with that section of the tune and it really does show when driving the car on the street.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
    • Did some FASTing ...got the impression that the actual part# was a moot point ; seems all of these hardlines for coolant are discontinued/NLA... like, I take it you're after the hardline that bolts onto to the manifold...that's NLA according to amayama & nengun .... ...just to clear up some confusion, they typically mounted the AAC valve to the intake manifold somewhere near a coolant passage, so the body of the valve heats up & holds it open when engine's up to temp - no coolant flows through the valve, it's a mechanical, thermal connection.
×
×
  • Create New...